Product Description

 

Product Description

 

Product Parameters

 

Item	Model	BDW-6/2	BDW-7/2	BDW-8/2	BDW-9/2	BDW-10/2	BDW-10/2-S	BDW-12/2-S	BDW-16/2-S
Discharge volume	M3/min	6	7	8	9	10	10	12	16
Nominal exhaust pressure	MPa	0.2	0.2	0.2	0.2	0.2	0.2	0.2	0.2
Shaft power	Kw	≤25.5	≤29	≤33	≤35	≤40	≤40	≤44	≤56
Maximum speed	R/min	1250	12 units.Nearly 8500 units per month. Q: How do you control the quality of product? A:Our Factory has standard production workshop,gets ISO CCC BV certificates,our workers are well trained. Every unit of product under goes a rigorous inspection process. Q: Do you accept custom order? What’s is your MOQ order? A:Yes, we do, our MOQ is 1 unit. Q: What’s the payment terms? A:By T/T or L/C at sight. Q: How about shipment? A:20FT container, 40FT container,40FT high container. Q:Which country do you have exported to? A:We have exported to More than 60 countries and regions in, Russia, Central Asia, Southeast Asia,Southeast Asia and South America.   Q:What is the product used for? A:Normally our air compressors used for loading or unloading of Powdered particles , bulk cement , flour, grains etc.   Job Classification: Reciprocating Transmission Power: Internal-combustion Engine Cooling Method: Air-cooled Cylinder Arrangement Mode: Symmetrical Balance Displacement: 10-100m²/m Rotation Speed: 450-1000r/min

What are the advantages of using rotary vane compressors?

Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:

1. Compact and Lightweight:

Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.

2. High Efficiency:

Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.

3. Quiet Operation:

Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.

4. Oil Lubrication:

Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.

5. Versatile Applications:

Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.

6. Easy Maintenance:

Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

How do you troubleshoot common air compressor problems?

Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:

1. No Power:

• Check the power source and ensure the compressor is properly plugged in.
• Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
• Verify that the compressor’s power switch or control panel is turned on.

2. Low Air Pressure:

• Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
• Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
• Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

3. Excessive Noise or Vibration:

• Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
• Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
• Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

4. Air Leaks:

• Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
• Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
• Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

5. Excessive Moisture in Compressed Air:

• Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
• Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
• Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

6. Motor Overheating:

• Ensure the compressor’s cooling system is clean and unobstructed.
• Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
• Verify that the compressor is not being operated in an excessively hot environment.
• Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
• Consider using a thermal overload protector to prevent the motor from overheating.

If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.

What are the different types of air compressors?

There are several different types of air compressors, each with its own unique design and operating principle. Here’s an overview of the most commonly used types:

1. Reciprocating Air Compressors: Reciprocating air compressors, also known as piston compressors, use one or more pistons driven by a crankshaft to compress air. They operate by drawing air into a cylinder, compressing it with the piston’s up-and-down motion, and discharging the compressed air into a storage tank. Reciprocating compressors are known for their high pressure capabilities and are commonly used in industrial applications.

2. Rotary Screw Air Compressors: Rotary screw air compressors utilize two interlocking screws to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads. These compressors are known for their continuous duty cycle, high efficiency, and quiet operation. They are widely used in industrial, commercial, and automotive applications.

3. Centrifugal Air Compressors: Centrifugal air compressors rely on the principle of centrifugal force to compress air. They use a high-speed impeller to accelerate the incoming air and then convert the kinetic energy into pressure energy. Centrifugal compressors are commonly used in large-scale industrial applications that require high volumes of compressed air.

4. Rotary Vane Air Compressors: Rotary vane air compressors employ a rotor with sliding vanes that compress the air. As the rotor rotates, the vanes slide in and out of the rotor, creating compression chambers. Air is drawn in, trapped, and compressed as the vanes move. These compressors are compact, reliable, and suitable for small to medium-sized applications.

5. Axial Flow Air Compressors: Axial flow air compressors are primarily used in specialized applications such as aircraft engines and gas turbines. They utilize a series of rotating and stationary blades to compress air in a continuous flow. Axial flow compressors are known for their high flow rates and are designed for applications that require large volumes of compressed air.

6. Scroll Air Compressors: Scroll air compressors consist of two interlocking spirals or scrolls that compress the air. One spiral remains stationary while the other orbits around it, creating a series of expanding and contracting pockets that compress the air. Scroll compressors are compact, reliable, and commonly used in applications where low noise and oil-free air are required, such as medical and dental equipment.

These are just a few examples of the different types of air compressors available. Each type has its own advantages, capabilities, and ideal applications. The choice of air compressor depends on factors such as required pressure, flow rate, duty cycle, noise level, oil-free operation, and specific application requirements.

editor by CX 2023-10-24