Tag Archives: air compressor china

China best Dental Oil Less Free Silent Air Compressor for 3 Dental Chair with Hot selling

Product Description

Dental Oil Less Free silent Air Compressor for 3 dental chair

Product Description

Feature:

– Air pump up to 3,000hours work time, the longest life air compressor in the world.
– Low noise and vibration air pump,keep slient work enviroment, make good mood to both dentist and
patient.kill patient’s nerves.
– Famous brand water filter,dry and clean air,offer green air to avoaid cross-infection.
– Air tank have internal oxidation-proofed precess,360° protect air pump and offer hygiene air even dentist
forgot to drain away the water.
– Instead of plastic pipe, top quality metal pipe to avoaid explose.
– Rubber Foot keep the air compressor away from wet place and reduce vibration

Product Parameters

Product Parameter
One for one	Air Compressor (one for one)
	• Rated Voltage: 220VAC 50Hz
	• Current: 2.8A
	• Power: 550W
	• Volume Flow: 70L/ min
	• Actuating Pressure: 0.5Mpa
	•Rated exhaust pressure:0.77Mpa
	• Gas Holder Volume: 32L
	• Noise: 55- 62dB
One for two	• Rated voltage: 220VAC 50Hz
	• Current: 3.7A
	• Power: 840W
	• Volume flow: 105L/ min
	• Actuating pressure: 0.5Mpa
	• Rated exhaust pressure: 0.77Mpa
	• Gas holder volume: 40L
	• Noise: 58-64dB
One for three	•Rated Voltage: 220VAC 50Hz
	•Current: 5.6A
	•Power 1100W
	•Volume flow: 140L/ min
	•Actuating pressure: 0.5 Mpa
	•Rated exhaust pressure: 0.77Mpa
	•Gas holder volume: 60L
	•Noise: 65-75dB
One for four	• Rated Voltage: 220VAC 50Hz
	• Current: 11.2A
	• Power: 1680W
	• Volume Flow: 200L/ min
	• Actuating Pressure: 0.5Mpa
	•Rated exhaust pressure:0.77Mpa
	• Gas Holder Volume: 60L
	• Noise: 80-85dB
One for six	• Rated Voltage: 220VAC 50Hz;
	• Current: 11.4A;
	• Power: 2520W;
	• Volume Flow: 300L/ min;
	• Actuating Pressure: 0.8Mpa;
	•Rated exhaust pressure:0.77Mpa
	• Gas Holder Volume: 90L;
	• Noise: 80-85dB

Detailed Photos

Working Shop

Advantage:
Oil Free: Compare to lubrication compressor, one-step operation, do not need any lubricated oil, and harmless to the human body, more health and hygiene.
Super Silent: Noise level lower than 60dB, ensure have friendly-enviromently treating room.
Multi-Phase Filteration: Advanced branded water filter to ensure extremely green and dry air.
Easy Using: One-step operation, when connecting with power, air compressor work automatic, also equipped with thermal prevention deviceto avoid over heating to protect motors.
Green Air: Air tank have internal oxidation-proofed precess,avoaid corrosion and supply hygiene air to the equipments.
Energy Saving: High quality pressure switch used to control the power of air compressor automatically stop when reach max pressure, and restart at mix pressure.
Low Vibration: Robber foot reduce vibration and keep the air compressor away from wet place.
High Duability: long life air pump up to 3,000 hours working time.
Simple Operation: No need to lubricate oil.

Applications:
Dental clinic, medical and health, SPA, Tattoo house, scientific research, electronic, chemical, Laboratory, spraying, Industrial, Printing etc.

FAQ

Q1: Are you a manufacture or a trading company?
A: Mydent Dental is 1 of the professional manufacture of dental equipment in China for 15 years. Our products also have been awarded the CE and ISO certificate.

Q2: How long is the warranty and what does it cover?
A: All of dental chair has 1 year warranty, if having any problem, you can send us the pictures or videos, we will send you the parts for free as the replacement within the first year.

Q3: Do you test all your goods before delivery?
A: Yes, we have strictly test twice before delivery

Q4: Where is Mydent Dental Company?
A: We are located in the southern of China, HangZhou City, near to HangZhou. Warmly welcome to visit us!

Q5: What is your terms of payment?
A: 1.For large quantity, 30% T/T or Western Union deposit payment before production, 70% balance must be paid before shipment
2.For few amount, full payment should be made within 5 working days of placing your order.

Q6: How can I get EXW or C&F price?
A: If you are sourcing a product, welcome to send us email or call us and inform which country are you from, our regional representative will send you specific information. Normally production time of our products is from 1 week to 2 weeks depending on the quantity ordered.

Company Profile

HangZhou Mydent Medical Instrument Co., Ltd is profectional enterprise of manufacture, production and sale of dental equipment and mateiral.
We supply full range of the dental products including dental unit and its accessories, LED curing light, dental handpiece, CHINAMFG burs, endo files, oiless air compressor, orthodontic instruments and material and so on.
Competitive price, good quality, on-time delivery and good service it′ S our tenet. We wants to be your reliable business parter and faithful friend in China. Also we are looking CHINAMFG a long time business with you and your company!
Contact
Contact person : CHINAMFG
Add :423# jiebian RoadLuocun Shishan Town, Xihu (West Lake) Dis. District, HangZhou /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Interface:	4 Holes
Teeth Whitening Method:	Laser Whitening
Applicable Departments:	Orthodontic Department
Certification:	ISO
Type:	Medical Silent Oil-Free Air Compressor
Material:	Metal

air compressor

What are the energy-saving technologies available for air compressors?

There are several energy-saving technologies available for air compressors that help improve their efficiency and reduce energy consumption. These technologies aim to optimize the operation of air compressors and minimize energy losses. Here are some common energy-saving technologies used:

1. Variable Speed Drive (VSD) Compressors:

VSD compressors are designed to adjust the motor speed according to the compressed air demand. By varying the motor speed, these compressors can match the output to the actual air requirement, resulting in energy savings. VSD compressors are particularly effective in applications with varying air demands, as they can operate at lower speeds during periods of lower demand, reducing energy consumption.

2. Energy-Efficient Motors:

The use of energy-efficient motors in air compressors can contribute to energy savings. High-efficiency motors, such as those with premium efficiency ratings, are designed to minimize energy losses and operate more efficiently than standard motors. By using energy-efficient motors, air compressors can reduce energy consumption and achieve higher overall system efficiency.

3. Heat Recovery Systems:

Air compressors generate a significant amount of heat during operation. Heat recovery systems capture and utilize this wasted heat for other purposes, such as space heating, water heating, or preheating process air or water. By recovering and utilizing the heat, air compressors can provide additional energy savings and improve overall system efficiency.

4. Air Receiver Tanks:

Air receiver tanks are used to store compressed air and provide a buffer during periods of fluctuating demand. By using appropriately sized air receiver tanks, the compressed air system can operate more efficiently. The tanks help reduce the number of starts and stops of the air compressor, allowing it to run at full load for longer periods, which is more energy-efficient than frequent cycling.

5. System Control and Automation:

Implementing advanced control and automation systems can optimize the operation of air compressors. These systems monitor and adjust the compressed air system based on demand, ensuring that only the required amount of air is produced. By maintaining optimal system pressure, minimizing leaks, and reducing unnecessary air production, control and automation systems help achieve energy savings.

6. Leak Detection and Repair:

Air leaks in compressed air systems can lead to significant energy losses. Regular leak detection and repair programs help identify and fix air leaks promptly. By minimizing air leakage, the demand on the air compressor is reduced, resulting in energy savings. Utilizing ultrasonic leak detection devices can help locate and repair leaks more efficiently.

7. System Optimization and Maintenance:

Proper system optimization and routine maintenance are essential for energy savings in air compressors. This includes regular cleaning and replacement of air filters, optimizing air pressure settings, ensuring proper lubrication, and conducting preventive maintenance to keep the system running at peak efficiency.

By implementing these energy-saving technologies and practices, air compressor systems can achieve significant energy efficiency improvements, reduce operational costs, and minimize environmental impact.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

How does an air compressor work?

An air compressor works by using mechanical energy to compress and pressurize air, which is then stored and used for various applications. Here’s a detailed explanation of how an air compressor operates:

1. Air Intake: The air compressor draws in ambient air through an intake valve or filter. The air may pass through a series of filters to remove contaminants such as dust, dirt, and moisture, ensuring the compressed air is clean and suitable for its intended use.

2. Compression: The intake air enters a compression chamber, typically consisting of one or more pistons or a rotating screw mechanism. As the piston moves or the screw rotates, the volume of the compression chamber decreases, causing the air to be compressed. This compression process increases the pressure and reduces the volume of the air.

3. Pressure Build-Up: The compressed air is discharged into a storage tank or receiver where it is held at a high pressure. The tank allows the compressed air to be stored for later use and helps to maintain a consistent supply of compressed air, even during periods of high demand.

4. Pressure Regulation: Air compressors often have a pressure regulator that controls the output pressure of the compressed air. This allows the user to adjust the pressure according to the requirements of the specific application. The pressure regulator ensures that the compressed air is delivered at the desired pressure level.

5. Release and Use: When compressed air is needed, it is released from the storage tank or receiver through an outlet valve or connection. The compressed air can then be directed to the desired application, such as pneumatic tools, air-operated machinery, or other pneumatic systems.

6. Continued Operation: The air compressor continues to operate as long as there is a demand for compressed air. When the pressure in the storage tank drops below a certain level, the compressor automatically starts again to replenish the compressed air supply.

Additionally, air compressors may include various components such as pressure gauges, safety valves, lubrication systems, and cooling mechanisms to ensure efficient and reliable operation.

In summary, an air compressor works by drawing in air, compressing it to increase its pressure, storing the compressed air, regulating the output pressure, and releasing it for use in various applications. This process allows for the generation of a continuous supply of compressed air for a wide range of industrial, commercial, and personal uses.

China best Dental Oil Less Free Silent Air Compressor for 3 Dental Chair with Hot selling
editor by CX 2024-01-09

China manufacturer Portable Electric Air Pump Tire Inflator Air Compressor Pump air compressor repair near me

Product Description

Supply Ability
Supply Ability:
1000000 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
opp bag+carton
Port
HangZhou, ZheJiang , HangZhou, Tianjiang
Lead Time :

Quantity(Sets)	1 – 5000	>5000
Est. Time(days)	25	To be negotiated

Product Description

Descriptions

Portable Air Compressor Pump, Electric Air Pump Tire Inflator 12V DC with Pressure Gauge Plastic + ABS Quickly Inflate Or Deflate – The compact rechargeable electric air pump both inflates and deflates a variety of things in a quick amount of time: pool toys, vacuum bags, camping air beds, and more, making both setup and storage of your items easy and efficient Easy to Use – The inflatable mattress pump is compatible with 12V DC power supply.
To inflatable, just put the inflatable head at the filling hold, then press the switch.
Our electric air mattress pumps are simple to operate Easy and Quick – Simply turn your vehicle on, plug in the air compressor, and inflate! A high-flow pump inflates your tires up to 35 Liters per Minute, putting you back on the road quickly; includes a storage case for added conveninece Compact & Lightweight – Our high pressure air pump is convenient to pack and transport; Our quick inflatable air pump is easily stored for next use; The small size of this electric pump will spare more room for you; Electric air mattress pump is portable for operation independently by 1 person

Portable Air Compressor Pump, Electric Air Pump Tire Inflator 12V DC with Pressure Gauge

Operating Instructions:

With low noise.
Compact and portable, easy to use.
Provide pressure gauge and 3 nozzle adapters.
Ideal for inflating tires, balls, rubber floater, hovercraft and so on

Portable Air Compressor Pump, Electric Air Pump Tire Inflator 12V DC with Pressure Gauge

Notice:

Common user error: Inflator will only inflate to max pressure and then automatically shuts off. It will not turn on to inflate a tire that is already at max pressure.

Portable Air Compressor Pump, Electric Air Pump Tire Inflator 12V DC with Pressure Gauge

Product Spec.
*Brand	AUTOALL
*Fit Car	Universal
*Model	C57139
*Spec.	Cylinder: 16mm 50cm air hose 3m cord with cigarette lighter plug Pressure gauge: 100-300psi for options Accessories: 2 nozzle adapters and 1 sports needle

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Job Classification:	Tire Pressure Gauge
Certificaton:	Ce
Product Name:	Portable Air Compressor Pump
Color:	Gold
Size:	Metal
Warranty:	2 Years

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What are the advantages of using rotary vane compressors?

Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:

1. Compact and Lightweight:

Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.

2. High Efficiency:

Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.

3. Quiet Operation:

Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.

4. Oil Lubrication:

Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.

5. Versatile Applications:

Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.

6. Easy Maintenance:

Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

Can air compressors be used for medical and dental applications?

1. Dental Tools:

2. Medical Devices:

3. Laboratory Applications:

4. Surgical Tools:

5. Sterilization and Autoclaves:

6. Dental Air Compressors:

7. Air Quality Standards:

8. Compliance and Regulations:

air compressor

What is the difference between a piston and rotary screw compressor?

Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

1. Operating Principle:

Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

China manufacturer Portable Electric Air Pump Tire Inflator Air Compressor Pump air compressor repair near me
editor by CX 2024-01-05

China Good quality Oil Free Vacuum Pump Manufacturer 550W AC220V 100V 60Hz 50Hz Laboratory Medical Negative Pressure Pump Small Air Compressor Class F Copper Wire Motor air compressor lowes

Product Description

Model	BST550AFZ/BSZ
Voltage/frequency (V/Hz)	220-240V/50Hz 100v-120v/60Hz
Input power(W)	≤400
Speed (r/min)	≥1350 1650
Primary vacuumKPa	-94KPa
Secondary vacuumKPa	-101KPa
Restart pressure (KPa)	0KPa
Rated volume flow (m3/h)	≥7.2m3/h @0KPa;
Noise dB(A)	≤60dB(A)
Ambient temperature ºC	-20~65 ºC
Insulation Class	F
Cold insulation resistance (MΩ)	≥100MΩ
Voltage resistance	1500V/50Hz 1min (No breakdown)
Thermal protector	Automatic reset 155±5ºC
Capacitance (μF)	20μF±5% 50μF±5%
Net weight (Kg)	7.8Kg
Installation Dimensions (mm)	203.2×88.9mm(Install thread 4-M6)
External Dimensions (mm)	*266.8128212.7mm*

Typical application
Respirator (ventilator)	oxygenerator
Disinfectant sprayer	Blood analyzer
Clinical aspirator	Dialysis / hemodialysis
Dental vacuum drying oven	Air suspension system
Vending machines / coffee blenders and coffee machines	Massage chair
Chromatographic analyzer	Teaching instrument platform
On board access control system	Airborne oxygen generator

Why choose CHINAMFG air compressor
1. It saves 10-30% energy than the air compressor produced by ordinary manufacturers.
2. It is widely used in medical oxygen generator and ventilator .
3. A large number of high-speed train and automobile application cases, supporting – 41 to 70 ºC, 0-6000 CHINAMFG above sea level .
4. Medium and high-end quality, with more than 7000 hours of trouble free operation for conventional products and more than 15000 hours of trouble free operation for high-end products.
5. Simple operation, convenient maintenance and remote guidance.
6. Faster delivery time, generally completed within 25 days within 1000 PCs.

Machine Parts

Name: Motor
Brand: COMBESTAIR
Original: China
1.The coil adopts the fine pure copper enameled wire, and the rotor adopts the famous brand silicon steel sheet such as ZheJiang baosteel.
2.The customer can choose the insulation grade B or F motor according to What he wants.
3.The motor has a built-in thermal protector, which can select external heat sensor.
4.Voltage from AC100V ~120V, 200V ~240V, 50Hz / 60Hz, DC6V~200V optional ; AC motor can choose double voltage double frequency ; DC Motor can choose the control of the infinitely variable speed.

Machine Parts

Name: Bearing
Brand: ERB , CHINAMFG , NSK
Original: China ect.
1.Standard products choose the special bearing ‘ERB’ in oil-free compressor, and the environment temperature tolerance from -50ºC to 180 ºC . Ensure no fault operation for 20,000 hours.
2.Customers can select TPI, NSK and other imported bearings according to the working condition.

Machine Parts

Name: Valve plates
Brand: SANDVIK
Original: Sweden
1.Custom the valve steel of Sweden SANDVIK; Good flexibility and long durability.
2.Thickness from 0.08mm to 1.2mm, suitable for maximum pressure from 0.8 MPa to 1.2 MPa.

Machine Parts

Name: Piston ring
Brand: COMBESTAIR-OEM , Saint-Gobain
Original: China , France
1.Using domestic famous brand–Polytetrafluoroethylene composite material; Wear-resistant high temperature; Ensure more than 10,000 hours of service life.
2.High-end products: you can choose the ST.gobain’s piston ring from the American import.

serial number	Code number	Name and specification	Quantity	Material	Note
1	212571109	Fan cover	2	Reinforced nylon 1571
2	212571106	Left fan	1	Reinforced nylon 1571
3	212571101	Left box	1	Die-cast aluminum alloy YL104
4	212571301	Connecting rod	2	Die-cast aluminum alloy YL104
5	212571304	Piston cup	2	PHB filled PTFE
6	212571302	Clamp	2	Die-cast aluminum alloy YL102
7	7050616	Screw of cross head	2	Carbon structural steel of cold heading	M6•16
8	212571501	Air cylinder	2	Thin wall pipe of aluninun alloy 6A02T4
9	17103	Seal ring of Cylinder	2	Silicone rubber
10	212571417	Sealing ring of cylinder cover	2	Silicone rubber
11	212571401	Cylinder head	2	Die-cast aluminum alloy YL102
12	7571525	Screw of inner hexagon Cylinder head	12		M5•25
13	17113	Sealing ring of connecting pipe	4	Silicong rubber
14	212571801	Connecting pipe	2	Aluminum and aluminum alloy connecting rod LY12
15	7100406	Screw of Cross head	4	1Cr13N19	M4•6
16	212571409	Limit block	2	Die-cast aluminum alloy YL102
17	000402.2	Air outlet valve	2	7Cr27 quenching steel belt of The Swedish sandvik
18	212571403	valve	2	Die-cast aluminum alloy YL102
19	212571404	Air inlet valve	2	7Cr27 quenching steel belt of The Swedish sandvik
20	212571406	Metal gasket	2	Stainless steel plate of heat and acidresistance
21	212571107	Right fan	1	Reinforced nylon 1571
22	212571201	Crank	2	Gray castiron H20-40
23	14040	Bearing 6006-2Z	2
24	70305	Tighten screw of inner hexagon flat end	2		M8•8
25	7571520	Screw of inner hexagon Cylinder head	2		M5•20
26	212571102	Right box	1	Die-cast aluminum alloy YL104
27	6P-4	Lead protective ring	1
28	7095712-211	Hexagon head bolt	2	Carbon structural steel of cold heading	M5•152
29	715710-211	Screw of Cross head	2	Carbon structural steel of cold heading	M5•120
30	16602	Light spring washer	4		ø5
31	212571600	Stator	1
32	70305	Lock nut of hexagon flange faces	2
33	212571700	Rotor	1
34	14032	Bearing 6203-2Z	2

FAQ

Q1: Are you factory or trade company?
A1: We are factory.

Q2: What the exactly address of your factory?
A2: Our factory is located in Linbei industrial area No.30 HangZhou City of ZHangZhoug Province, China

Q3: Warranty terms of your machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: Generally, 1000 pcs can be delivered within 25 days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome

Q7:Can you accept non-standard customization?

A7:We have the ability to develop new products and can customize, develop and research according to your requirements

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Remote Guided Maintenance
Warranty:	2 Years
Principle:	Mixed-Flow Compressor

Samples:	US$ 60/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

Air compressors are used to supply compressed air for the combustion process in power generation. In fossil fuel power plants, such as coal-fired or natural gas power plants, compressed air is required to deliver a steady flow of air to the burners. The compressed air helps in the efficient combustion of fuel, enhancing the overall performance and energy output of the power plant.

2. Instrumentation and Control:

Air compressors are utilized for instrumentation and control systems in power generation facilities. Compressed air is used to operate pneumatic control valves, actuators, and other pneumatic devices that regulate the flow of steam, water, and gases within the power plant. The reliable and precise control provided by compressed air ensures efficient and safe operation of various processes and equipment.

3. Cooling and Ventilation:

In power generation, air compressors are involved in cooling and ventilation applications. Compressed air is used to drive air-operated cooling fans and blowers, providing adequate airflow for cooling critical components such as generators, transformers, and power electronics. The compressed air also assists in maintaining proper ventilation in control rooms, substations, and other enclosed spaces, helping to dissipate heat and ensure a comfortable working environment.

4. Cleaning and Maintenance:

Air compressors are employed for cleaning and maintenance tasks in power generation facilities. Compressed air is utilized to blow away dust, dirt, and debris from equipment, machinery, and electrical panels. It helps in maintaining the cleanliness and optimal performance of various components, reducing the risk of equipment failure and improving overall reliability.

5. Pneumatic Tools and Equipment:

In power generation plants, air compressors provide the necessary compressed air for operating pneumatic tools and equipment. These tools include impact wrenches, pneumatic drills, grinders, and sandblasting equipment, which are utilized for installation, maintenance, and repair tasks. The high-pressure air generated by compressors enables efficient and reliable operation of these tools, enhancing productivity and reducing manual effort.

6. Nitrogen Generation:

Sometimes, air compressors are used in power generation for nitrogen generation. Compressed air is passed through a nitrogen generator system, which separates nitrogen from other components of air, producing a high-purity nitrogen gas stream. Nitrogen is commonly used in power plant applications, such as purging systems, blanketing in transformers, and generator cooling, due to its inert properties and low moisture content.

7. Start-up and Emergency Systems:

Air compressors are an integral part of start-up and emergency systems in power generation. Compressed air is utilized to power pneumatic starters for gas turbines, providing the initial rotation needed to start the turbine. In emergency situations, compressed air is also used to actuate emergency shutdown valves, safety systems, and fire suppression equipment, ensuring the safe operation and protection of the power plant.

Overall, air compressors contribute to the efficient and reliable operation of power generation facilities, supporting combustion processes, control systems, cooling, cleaning, and various other applications critical to the power generation industry.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.

Compression Process:

In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.

Pressure Output:

The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.

Efficiency:

Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.

Intercooling:

Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.

Applications:

The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.

It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.

In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.

air compressor

Can you explain the basics of air compressor terminology?

Understanding the basic terminology related to air compressors can help in better comprehension of their operation and discussions related to them. Here are some essential terms related to air compressors:

1. CFM (Cubic Feet per Minute): CFM is a unit of measurement that denotes the volumetric flow rate of compressed air. It indicates the amount of air a compressor can deliver within a minute and is a crucial factor in determining the compressor’s capacity.

2. PSI (Pounds per Square Inch): PSI is a unit of measurement used to quantify pressure. It represents the force exerted by the compressed air on a specific area. PSI is a vital specification for understanding the pressure capabilities of an air compressor and determining its suitability for various applications.

3. Duty Cycle: Duty cycle refers to the percentage of time an air compressor can operate in a given time period. It indicates the compressor’s ability to handle continuous operation without overheating or experiencing performance issues. For instance, a compressor with a 50% duty cycle can run for half the time in a given hour or cycle.

4. Horsepower (HP): Horsepower is a unit used to measure the power output of a compressor motor. It indicates the motor’s capacity to drive the compressor pump and is often used as a reference for comparing different compressor models.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air delivered by the compressor. It helps in stabilizing pressure fluctuations, allowing for a more consistent supply of compressed air during peak demand periods.

6. Single-Stage vs. Two-Stage: These terms refer to the number of compression stages in a reciprocating air compressor. In a single-stage compressor, air is compressed in a single stroke of the piston, while in a two-stage compressor, it undergoes initial compression in one stage and further compression in a second stage, resulting in higher pressures.

7. Oil-Free vs. Oil-Lubricated: These terms describe the lubrication method used in air compressors. Oil-free compressors have internal components that do not require oil lubrication, making them suitable for applications where oil contamination is a concern. Oil-lubricated compressors use oil for lubrication, enhancing durability and performance but requiring regular oil changes and maintenance.

8. Pressure Switch: A pressure switch is an electrical component that automatically starts and stops the compressor motor based on the pre-set pressure levels. It helps maintain the desired pressure range in the receiver tank and protects the compressor from over-pressurization.

9. Regulator: A regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications and ensures a consistent and safe supply of compressed air.

These are some of the fundamental terms associated with air compressors. Familiarizing yourself with these terms will aid in understanding and effectively communicating about air compressors and their functionality.

China Good quality Oil Free Vacuum Pump Manufacturer 550W AC220V 100V 60Hz 50Hz Laboratory Medical Negative Pressure Pump Small Air Compressor Class F Copper Wire Motor air compressor lowes
editor by CX 2024-01-05

China Hot selling Small Mobile Reciprocate Piston Air Compressors for Construction air compressor parts

Product Description

Small mobile Reciprocate piston air compressors for construction

Specification:

Mode	Motor power	Cylinder qty mm	Rotation speed r/min	FAD m3/min	Working pressure Mpa	Dimension LWH mm	Weight KGS
W-1.8/5	S1100*11KW	3*100	1200	1.8	0.5	1500x5600x4960	300
W-2.8/5	S1100-35KW	3*135	1120	2.6	0.5	16708201150	450
W-3.0/5	S1125*18.5KW	3*120	1070	3	0.5	18808701230	460
W-3.2/7	S1125*18.5KW	3*125	800	3.2	0.7	19108001620	530
W-3.5/5	S1125*18.5KW	3*125	1170	3.5	0.5	18808701240	460
SF4.0/5	S1125*18.5KW	4*120	1070	4	0.5	0	655
2V-3.5/5	S1125*18.5KW	4*115	980	3.5	0.5	18009501300	650
2V-4/5	S1125*18.5KW	4*120	980	4	0.5	18009501300	750

Main Features:

1.Heavy cast iron body: heavy load, long stroke, low fuel consumption, low noise

2.Cylinder: made of high-grade cast iron, strength, good lubricity, wall by the fine honing, wear-resistant, durable

3.Piston ring: good elasticity, excellent wear resistance, low oil consumption, not easy to make the valve group carbon deposition and loss of oil to burn the crankshaft and connecting rod.

4.The crankshaft, connecting rod, piston: well balanced, wear resistance, high strength, smooth running balance.

5.Pressure cast iron pump, can be adapted to use large horsepower;

6.Customers could choose different type of compressor pump with different size of air tank or different motor power

Focus services:

before sales

1.24 hours online service .
2.Any inquiries will be replied within 12 hours.
3.Offer professional machine details and information.
4.Technology knowledge share .

on sale

1.Protect the client payment security .
2.Reasonable price and ensure quality .
3.Send machine pictures , videos as client need and let client know machine

more better.

after sales

1.Fast delivery and test and adjust machine working well before delivery.
2.Supply manual book and technical support in order to use well.
3.Offer install pictures step by step or videos and dispatch the engineer.
4.Guarantee time is 1 year.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Overseas Service Center with Sufficient Engineers
Warranty:	One Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Arrangement:	Parallel Arrangement
Cylinder Position:	Horizontal

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

2. Instrumentation and Control:

3. Cooling and Ventilation:

4. Cleaning and Maintenance:

5. Pneumatic Tools and Equipment:

6. Nitrogen Generation:

7. Start-up and Emergency Systems:

air compressor

What are the environmental considerations when using air compressors?

When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

Energy Efficiency:

Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.

Air Leakage:

Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.

Noise Pollution:

Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.

Emissions:

While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.

Proper Waste Management:

Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.

Sustainable Practices:

Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.

By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.

air compressor

What is the difference between a piston and rotary screw compressor?

1. Operating Principle:

Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

China Hot selling Small Mobile Reciprocate Piston Air Compressors for Construction air compressor parts
editor by CX 2024-01-04

China wholesaler Portable Air Compressor Xas186 Xats156 Xahs146 Xahs186 Xavs166 with high quality

Product Description

Product Description
By continuous pursuit of technological innovation, adapting to the direction of market development, and developing a more reliable and cost -effective single -stage high -voltage mobile screw air bearing. Extra comprehensive performance, more widely used in high -efficiency drilling, pipeline testing and related fields. For the use environment of extreme conditions, the unit is equipped with heavy fuel filters, large -capacity batteries, and fuel liquid heater can also be selected in the cold zone. The cooling cylinder of the cooling cylinder of the diesel engine can start worrying-free.

Features
1. High reliability
All major components use well -known domestic and foreign enterprises products and reliable quality. The pressure is constant, the flow of traffic is continuously adjusted continuously from 0-100%, and efficient energy saving, stable and reliable.
2. Convenience
Small volume, light weight, low noise; lightweight appearance, convenient transportation, achieve a small area of land, can also enter and exit in a narrow working conditions, reducing transportation costs.
Open the door design to ensure a large operating space and facilitate maintenance and maintenance. Save time and improve efficiency.
3. Adapt to harsh environments
This air compressor ensures that it can be perfected perfectly in the condition of cold temperature and hypoxia, which meets the carrying environment and various harsh conditions of use. Solved the troubles for customers, greatly improving work efficiency.
4. Comprehensive monitoring
The operating status of the device can be comprehensively monitored; Chinese and English control panels, the interface is simple and clear, the equipment operation status is clear at a glance, the operation is convenient, and it is equipped with non -normal automatic shutdown functions to ensure people and machine safety.
Product specifications series parameters
Product specifications series parameters

Model		HG7571A-18C
Compressor	Compresion mode	Oil -cooled screw first -Grade compression
	Engine displacement (m/min)	17
	Discharge pressure(bar)	1.8
	Compression Grade	single
	Volume of storage tank(L)	150
	Volume of screw oil(L)	90
Diesel engine	Engine manufacturer	Xihu (West Lake) Dis.feng Cummins
	Engine Type	Inline 6 -cylinder direct injection
	Engine type	6CTA8.3
	Number of cylinders	6
	Rated power(kw)	194
	rated speed(rpm)	2200
	Air rotation speed(rpm)	1400
	Diesel engine (lubricating) oil(L)	24
	Coolant volume(L)	70
Unit	Fuel tank capcity (L)	350
	Battery	6-QW-165MFx2
	Connection size	1-G2″ 1-G1″
	Drive Mode	Direct Coupler
	Length(mm)	3400(Without a trolley)
	Width(mm)	2571
	Height(mm)	2300
	Total weight(kg)	3200
	Operation moving way	Four wheels

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online
Lubrication Style:	Lubricated
Cooling System:	Air Cooling

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

2. Instrumentation and Control:

3. Cooling and Ventilation:

4. Cleaning and Maintenance:

5. Pneumatic Tools and Equipment:

6. Nitrogen Generation:

7. Start-up and Emergency Systems:

air compressor

How do you troubleshoot common air compressor problems?

Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:

1. No Power:

Check the power source and ensure the compressor is properly plugged in.
Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
Verify that the compressor’s power switch or control panel is turned on.

2. Low Air Pressure:

Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

3. Excessive Noise or Vibration:

Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

4. Air Leaks:

Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

5. Excessive Moisture in Compressed Air:

Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

6. Motor Overheating:

Ensure the compressor’s cooling system is clean and unobstructed.
Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
Verify that the compressor is not being operated in an excessively hot environment.
Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
Consider using a thermal overload protector to prevent the motor from overheating.

If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.

air compressor

Are there air compressors specifically designed for high-pressure applications?

Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:

1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.

2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.

3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.

4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.

When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.

High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.

China wholesaler Portable Air Compressor Xas186 Xats156 Xahs146 Xahs186 Xavs166 with high quality
editor by CX 2024-01-04

China wholesaler 75 HP CE Approved Industrial Energy Saving Two Stage Screw Air Compressor air compressor oil

Product Description

Hot Selling 75 HP CE Approved Industrial Energy Saving Compressor Two Stage Screw Air Compressor

Product Description

Permanent magnet variable frequency screw air compressor:
1. Constant pressure control: It can realize high-precision constant pressure control with a pressure fluctuation range of 0.01 MPa;
2. Variable frequency soft start: Eliminate the CHINAMFG current when starting, avoid grid impact, avoid current impact through step-by-step speed adjustment, and improve flexibility
3. Prevent no-load: The compressor is no-load during operation, reducing ineffective energy consumption;
Permanent magnet motors use high-efficiency rare earth magnets, no loss of magnetism at 180°C, and long service life; energy saving is about 6% to 7% compared with ordinary frequency conversion motors;
It can exert the highest efficiency in a wider range and make the air compressor more energy-saving.

Two stage air end
Feature:Two-stage compressor air-end
Advantage:Low compression ratio, Low temperature rising, Low air leakage
Benefit:15% energy-saving

High-efficiency Motor
Feature:IE4 permanent magnet motor/IE4 High-efficiency motor
Advantage:Motor efficiency 97%
Benefit:5% energy-saving

Intelligent control
Feature:VFD system
Advantage:Constant pressure output to remove pressure fluctuation and off-load, Constant temperature output at 9-~85°C, Low starting current to protect components
Benefit:15% energy-saving

Smart display screen
Feature:Intelligent control system
Advantage:10 inch monitor to show all the date
Benefit:Simple operation and touble free

Cooling fan
Feature:Large cooler system
Advantage:Axial flow Fan used for good cooling effect
Benefit:Allow ambient temperature at 52°C

Systematic Design of Oil separator
Feature:Large oil system
Advantage:Reduce internal pressure loss avoid oil, Leakage for safety
Benefit:3% energy-saving

Filter
Feature:Double filtering system
Advantage:Remove impurity from air and cleanness
Benefit:Longer life air -end and lubrication oil

Air inlet valve
Feature:High vacuum degree:700mmHg
Advantage:Large suction area, Low load energy consumption in unloaded operation,
Fast check: prevent unloading and shutdown oil injection
Benefit:Cast aluminum to avoid rust and temperature change

Technical Parameters

Model	Air Delivery (m3/min)				Power (kW)	Noise (Db)	Outlet diameter	Dimension (mm)	Weight (Kg)
Model	0.7Mpa	0.8Mpa	1.0Mpa	1.3Mpa	Power (kW)	Noise (Db)	Outlet diameter	L * W * H	Weight (Kg)
RK30APMII	4.3	4.1	3.5	2.7	22	68	G11/2	1500x1000x1350	650
RK40APMII	6	5.9	4.7	3.9	30	68	G11/2	1500x1000x1350	700
RK50APMII	7.1	6.9	5.8	5.4	37	68	G11/2	1500x1000x1350	750
RK60APMII	10	9.5	7.8	6.8	45	72	G2	2100x1300x1650	1250
RK75APMII	13	12.5	9.2	7.5	55	76	G2	2100x1300x1650	1300
RK100APMII	15.5	15.2	12	10.2	75	76	G2	2100x1300x1650	1350
RK125APMII	19.8	19.5	15	14	90	76	DN80	2500x1650x1900	2700
RK150APMII	24	23	19.2	16	110	76	DN80	2500x1650x1900	2800
RK180APMII	27.5	27	23.7	19	132	78	DN80	2500x1650x1900	3000
RK220APMII	33	32.5	27.5	22.5	160	78	DN80	3000x1900x1950	4300
RK250APMII	39	36	32	27.5	185	78	DN80	3000x1900x1950	4400
RK275APMII	43.5	41	35.5	31.5	200	78	DN100	3600x2200x2200	5000
RK300APMII	51.5	48.3	38.5	35.5	220	82	DN100	3600x2200x2200	5500
RK350APMII	54	51	45	38	250	82	DN100	3600x2200x2200	6000
RK380APMII	60	57	50	43	280	82	DN125	4000x2300x2300	6800
RK420APMII	65	62	56	50.5	315	82	DN125	4000x2300x2300	7000
RK480APMII	75	73	64	55	355	82	DN150	4200x2200x2350	8500
RK540APMII	84	82	72	61	400	82	DN150	4200x2200x2350	9000

Packaging & Shipping

Packaging & Shipping

1.Packing Details: Plywood crate pallet plus foam board and bubble film, Full closed wooden case. 1pcs/each package
(for stationary screw air compressor)
2.Shipping method: by sea, by LCL/FCL or as requested
3.Delivery method: FOB, CFR, CIF and EXW etc.
4.Delivery time: in 7-15 days after receiving deposit (customized machines not included)

Successful cases

Company Profile

ZheJiang CHINAMFG Machinery Co., Ltd. is a company dedicated to the production and research and development of various gas compression equipment. The company was established in 2012 and has a total of 5 licensed technical engineers. Mainly engaged in air, nitrogen, CO2 and other special gas compression equipment and after-treat equipment. With the development in recent years, the company has established a foreign trade team in ZheJiang , and hired foreign trade consultants with 10 years of industry experience to better serve customers worldwide. With excellent quality and the support of 30 distributors worldwide, our annual sales in 2018 exceeded 5 million US dollars. We look CHINAMFG to working with you to create a better tomorrow!

Payment and delivery

After Sales Service

1.24/7 after sales service support in different languages.
2.Follow up the feedback of products in 2 months interval by email or call.
3.Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center.
4.Technical training for customers in CHINAMFG air compressor factory or working site.
5.All kinds of technical documents in different languages.

FAQ

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of HangZhou,ZheJiang ,China. More than 18 years of experience in air compressor manufacturing.

Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.

Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.

Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Some key parts are imported from overseas
3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.

Q10.How long could your air compressor be used?
A: Generally, more than 10 years.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	24month
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can air compressors be used for shipbuilding and maritime applications?

Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:

1. Pneumatic Tools and Equipment:

Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.

2. Painting and Surface Preparation:

Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.

3. Pneumatic Actuation and Controls:

Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.

4. Air Start Systems:

In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.

5. Pneumatic Conveying and Material Handling:

In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.

6. Air Conditioning and Ventilation:

Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.

These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.

air compressor

How do you choose the right air compressor for woodworking?

Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

1. Required Air Volume (CFM):

Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

2. Tank Size:

Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

3. Maximum Pressure (PSI):

Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

4. Noise Level:

Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

5. Portability:

Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

6. Power Source:

Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

7. Quality and Reliability:

Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

8. Budget:

Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

air compressor

Are there air compressors specifically designed for high-pressure applications?

4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

China wholesaler 75 HP CE Approved Industrial Energy Saving Two Stage Screw Air Compressor air compressor oil
editor by CX 2024-01-04

China Best Sales 37kw 50HP 6.2m3/Min Superior Quality Gas Powered Screw Air Compressor for Filling Station air compressor repair near me

Product Description

37kw 50hp 6.2m3/min Superior Quality Gas Powered screw air compressor for Filling station

Products Description

Type:	Oil Injected Permanent Magnetic Screw Compressor
Voltage:	380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements
Working Pressure:	7bar/8bar/10bar
Installed Motor Power:	18.5~110 Kw
Color:	Blue
Driven Method:	Taper Connection Direct Driven
Air End:	High Efficiency Airend
Trademark:	SCR
Transport Package:	Standard Wooden Packing
Available Certificate:	CE, ISO, UL, ASME, GHOST
Origin:	ZheJiang , China
application:	Packing,Painting,Precision Electroplating,Peparing

Advantages:
1. China-Japan latest technology cooperation, high reliability.
2. Oil Cooling Permanent Magnetic Motor.
3. IP65 protection grade & heavy duty air filter, suitable for high dusty environment.
4. IE4 Efficiency motor efficiency.
5. Most energy saving mode, Only work at loading.
6. Wide frequency range 25%-100%.
7. Premium Magnetic material resist more than 180ºC temp.
8. Reliable PM motor supplier from Italy.
9. Direct Taper connection, no transmission power loss, easy maintenance.
10.Touch Screen PLC with preset running schedule, more intelligent control.
11. Both main motor and fan motor are inverter control, more accurate control.
12. Easy for installation and service.
13. Fantastic Energy Saving, save up to more than 30-40%.

Details image

HIGH QUALITY PM MOTOR

The motor winding take use of new technology vacuum expoxy potting process, it increase the thermal conducivity and motor insulation protection
Automatic vacuum expoxy processing enhance the motor quality
The new seal technology of winding, it is sealed with expoxy, better protection for winding.
F grade insulation grade, resist up to 180degree, integrated PTC protection.

PM MOTOR COOLING SCR heavy duty air filter

Liquid Cooling, IP65 PM Motor.
Indepent cooling system.

HIGH EFFICIENCY SEPARATION SYSTEM
Cyclone oil tank design encsure the high separation efficiency.
First stage mechanical centrifugal separation.
Second stage is high efficiency oil separator.
4000hours life-span of oil separator.
The oil content is lower than 3PPM.

LATEST V/F Inverter
* Latest V/F technology Inverter.
* CE/UL Certificed Inverter.
* Both Motor are inverter control.
* High reliable inverter brand proofed in the market.
* Professional service support.
* Automatic airend speed adjust to match your air demand, help good energy saving

How to choose ?

Model No.	Working pressure bar	Capacity(FAD) m3/min	Power kw	Driving model Cooling method	Noise level dB	Outlet diameter	Weight kg	Dimension mm
YCR7.5	7	1.2	7.5	Direct Air cooling(Standard)	63	G3/4″	400	890560840
	8	1.1
	10	1.0
	12	0.8
YCR11	7	1.8	11	Direct Air cooling(Standard)	64	G3/4″	460	10506901080
	8	1.6
	10	1.5
	12	1.3
YCR15	7	2.6	15	Direct Air cooling(Standard	65	G3/4″	500	10506901080
	8	2.4
	10	2.1
	12	1.8
YCR22	7	3.7	22	Direct driven Air cooling	65	G1″	550	13507801250
	8	3.5
	10	3.1
	12	2.7
YCR30	7	5.3	30	Direct driven Air cooling	67	G1-1/2″	940	14209001425
	8	5.1
	10	4.6
	12	3.9
YCR37	7	6.5	37	Direct driven Air cooling	67	G1-1/2″	1000	14209001425
	8	6.2
	10	5.6
	12	4.9
YCR45	7	8.1	45	Direct driven Air cooling	70	G1-1/2″	1050	175011001700
	8	7.5
	10	7.0
	12	6.0
YCR55	7	10.5	55	Direct driven Air cooling	73	G2″	1500	175011001700
	8	10
	9	9.0
	12	8.0
YCR75	7	14.3	75	Direct driven Air cooling	75	G2″	1700	175011001700
	8	13.0
	10	11.8
	12	10.5

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Angular
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

Can air compressors be used for shipbuilding and maritime applications?

1. Pneumatic Tools and Equipment:

2. Painting and Surface Preparation:

3. Pneumatic Actuation and Controls:

4. Air Start Systems:

5. Pneumatic Conveying and Material Handling:

6. Air Conditioning and Ventilation:

air compressor

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China Best Sales 37kw 50HP 6.2m3/Min Superior Quality Gas Powered Screw Air Compressor for Filling Station air compressor repair near me
editor by CX 2024-01-04

China wholesaler 15kw 20HP Variable Frequency Oil Free Screw Air Compressor Rj-125A lowes air compressor

Product Description

15KW 20HP Variable Frequency Oil Free Screw Air Compressor RJ-125A

Main Features:

1. The flexible belt will be automatically tensioned in use. Through adjusting the tension, minimize the loss of pressure and power, to enhance the efficiency of compression.

2. Using the precise spin-oil separator and special two-pole buffer separation, it can minimize the oil consumption, guarantee the outlet gas purity, and extend the lifetime of filter elements.

3. With the toothed V-belt, it has good heat dissipation, long life, higher gear drive and transmission efficiency, as high as over 98%.

Oil Filter: Good Quality filters ensure longer working life and save the maintenance time and cost.

Stainless Steel Hoses: High and low temperature resistant, high pressure resistant.

Compressed Air Vessel: Reduction of pressure drops and energy costs, quality air with low oil content.

Air End: Imported DLOL air end, advanced profile design.

Electric Motor: Premium efficiency Totally TEFC IP54/IP55 motor (Class F insulation) protects against dust and chemicals etc.

Air Filter: Two-stage dust removal and filtering system with efficiency of up to 99.9% even in heavy-duty environment.

Cooler: High quality aluminum material, alternating expression cooler fins, ensure the perfect radiating effect.

Technical parameters:

Our workshop:

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Free Spare Parts
Warranty:	One Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

What are the energy-saving technologies available for air compressors?

1. Variable Speed Drive (VSD) Compressors:

2. Energy-Efficient Motors:

3. Heat Recovery Systems:

4. Air Receiver Tanks:

5. System Control and Automation:

6. Leak Detection and Repair:

7. System Optimization and Maintenance:

air compressor

How are air compressors used in refrigeration and HVAC systems?

Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

1. Refrigerant Compression:

In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

2. Refrigeration Cycle:

The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

3. HVAC Cooling and Heating:

In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

4. Air Conditioning:

Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

5. Compressor Types:

Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

6. Energy Efficiency:

Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China wholesaler 15kw 20HP Variable Frequency Oil Free Screw Air Compressor Rj-125A lowes air compressor
editor by CX 2024-01-03

China factory Ols150 D 15m3/Min 18 Bar Diesel Portable Air Compressor for Sand Blasting/Mining/Jack Hammer Similar CHINAMFG CHINAMFG Rand CHINAMFG Portable Air Compressor with Good quality

Product Description

Oaliss’s objective is to be “Your very own system provider”. To fulfill this objective, CHINAMFG pays great attention to customer’s real needs and concerns, then provides feasible solutions. CHINAMFG chooses the most reliable suppliers from the industry and tests its performance before installing on our equipment. Product quality is our paramount goal. In the meantime, we do our best to fill the gaps between price and energy efficiency. Our equipment will be reliable enough to use and the price low enough to purchase. Combined with these distinct features, our high quality and variable products have been accepted by customers from various industries. Oaliss-your very own system provider.

Oaliss-your very own system provider.

Specification

Item	Description
Type	Diesel portable screw air compressor
Warranty	1 Year
Applicable Industries	Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works, Energy & Mining, Food & Beverage Shops, Other, Advertising Company
After Warranty Service	Spare parts
Local Service Location	Thailand, Vietnam, Pakistan, Russia, Sri Lanka
Showroom Location	Thailand, Vietnam, Pakistan, Russia, Sri Lanka
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Marketing Type	New Product 2571
Place of CHINAMFG	China
Brand Name	Oaliss

Oaliss’s portable diesel compressor is best suited for the construction industry. It has become the best friend for customers that need to take the tools to perform their work with them.

Developed in conjunction with energy efficiency, Oaliss’s portable compressor will stand the test of time as well as providing you with the ability that easy to move, easy to operate, and easy to service.

Reliable
Famous brand diesel engine, fitted with double air filters and heavy duty oil filter which could protect the compressor and improve reliability of the whole machine.

Energy efficiency
Smartly auto detect the running status, loading and unloading stage could be easily changed with actual working status, reduce the fuel consumption.

Power expert
Automatically detect the vessel pressure, then adjust the engine speed accordingly. The compressor could provide more volume during drilling operation.

Technical specifications 1

Com pressor		OLS30 D-7	OLS40 D-8	OLS50 D-8	OLS80 D-7	OLS100 D-8	OLS100 D-12
Working pressure	bar (g)	7	8	8	7	8	12
Free air delivery (FAD)	m3/min	2.5	3.5	5.2	8	10	10
Compression stages		One stage	One stage	One stage	One stage	One stage	One stage
Approx. outlet temperature	°C	<120	<120	<120	<120	<120	<120
Air compressor outlets	inches	2 x ¾”	2 x ¾”	3 x ¾”	1x¾”&1×1½”	1x¾”&1×1½”	1x¾”&1×1½”
Engine
Brand		Xichai	Xichai	Xichai	Xichai	Xichai	Xichai
Emissions regulation	CHN
Output at rated speed	kW/hp	20.6/28	26.5/36	36/49	49/66.5	81/110	96/130
Displacement	L	1.6	1.5	2.4	3.3	3.9	3.9
Fuel tank capacity	L		90	100	120	120	120
Rated speed	rpm	2200	3000	2200	2000	2200	2500
Dim ensions and weight
Length	mm	1860	2450	2450	2840	3380	3380
Width	mm	980	1330	1330	1680	1855	1855
Height	mm	1350	1500	1550	1885	2175	2175
Weight	kg	500	1070	1310	1710	2100	2100

Technical specifications 2

Com pressor		OLS130 D-13	OLS110 D-17	OLS120 D-8	OLS130 -17	OLS130 D-18	OLS150 D-18
Working pressure	bar (g)	13	17	8	17	18	18
Free air delivery (FAD)	m3/min	13	11	12	13	13	15
Compression stages		One stage	Two stages	Two stages	Two stages	Two stages	Two stages
Approx. outlet temperature	°C	<120	<120	<120	<120	<120	<120
Air compressor outlets	inches	2×1/₄“	1x¾”&1×1½”	1x¾”&1×1½”	1x¾”&1×1½”	1x¾”&1×1½”	1x¾”&1×1½”
Engine
Brand		Xichai	Yuchai	Cummins	Cummins	Yuchai	Yuchai
Emissions regulation	CHN
Output at rated speed	kW/hp	118/160	118/160	96/130	132/180	140/190	162/220
Displacement	L	4.8	4.8	3.9	5.9	6.5	7.8
Fuel tank capacity	L	180	180	180	180	320	270
Rated speed	rpm	2000	2200	2500	2200	2200	2200
Dim ensions and weight
Length	mm	2500	3260	3380	3505	3500	3460
Width	mm	2100	1950	1855	1950	2060	2040
Height	mm	2200	2150	2175	2190	2200	2280
Weight	kg	3200	2620	2570	2700	2700	2650

Technical specifications 3

Com pressor		OLS150 D-20	OLS160 D-8	OLS180 D-20	OLS185 D-20	OLS210 D-23	OLS230 D-25
Working pressure	bar (g)	20	8	20	20	23	25
Free air delivery (FAD)	m3/min	15	16	18	18.5	21	23
Compression stages		Two stages	Two stages	Two stages	Two stages	Two stages	Two stages
Approx. outlet temperature	°C	<120	<120	<120	<120	<120	<120
Air compressor outlets	inches	1x¾”&1×1½”	1x¾”&1×1½”	1×1″&1×2″	1×1″&1×2″	1×1″&1×2″	1×1″&1×2″
Engine
Brand		Cummins	Cummins	Yuchai	Cummins	Cummins	Cummins
Emissions regulation	CHN
Output at rated speed	kW/hp	160/215	110/150	191/260	194/260	242/325	264/360
Displacement	L	8.3	5.9	8.3	8.3	8.9	8.9
Fuel tank capacity	L	320	180	320	320	380	380
Rated speed	rpm	2200	2200	2200	2200	2100	2100
Dim ensions and weight
Length	mm	3465	3580	3660	3660	3660	3660
Width	mm	1800	2060	1900	1900	1980	1980
Height	mm	2310	2190	2310	2310	2480	2480
Weight	kg	4135	2700	4290	4290	5080	5200

Technical specifications 4

Com pressor		OLS240 D-8	OLS300 D-23	OLS350 D-25	OLS350 D-30	OLS470 D-13	OLS670 D-13
Working pressure	bar (g)	8	23	25	30	13	13
Free air delivery (FAD)	m3/min	24	30	35	35	47	67
Compression stages		Two stages	Two stages	Two stages	Two stages	Two stages	Two stages
Approx. outlet temperature	°C	<120	<120	<120	<120	<120	<120
Air compressor outlets	inches	1×1″&1×2″	1×1″&1×2″	1×1″&1×2″	1×1″&1×2″	DN125	DN125
Engine
Brand		Cummins	XiChai	Cummins	Cummins	Cummins	Cummins
Emissions regulation	CHN
Output at rated speed	kW/hp	160/215	310/420	410/550	410/550	410/550	563/755
Displacement	L	8.3	11	13	13	13	19
Fuel tank capacity	L	320	875	620	950	250	380
Rated speed	rpm	2200	2000	1900	1900	1900	1900
Dim ensions and weight
Length	mm	3660	3675	3800	4250	3800	4400
Width	mm	1980	1950	2100	2100	2200	2500
Height	mm	2310	2500	2325	2900	2400	2560
Weight	kg	4380	7000	8100	6500	8500	9500

Industrial equipment, printing service, pipelines, power plants, oil&gas, oil refinery, coating, painting,
plastics, steel industry, rubber, mechanical, blow molding, color sorter machine, shipyard, sandblasting,
metallurgy, etc.

To provide the right equipment to you, please send us your detailed requirements.

1 Q: How about the quality of products?

A: We are an authorized distributor of Atlas Copco. Don’t worry about the quality and service.

2 Q: How long is your delivery lead time?

A: If there is stock, the lead time is about 3 working days after we get the payment if need to
be produced, it depends.

3 Q: How about your overseas after-sale service?

A: (1)Provide customers with installation and commissioning online instructions.

(2)Worldwide agents and after service available.

4 Q: Can you accept OEM&ODM orders?

A: Yes, we have a professional design team, OEM&ODM orders are highly welcomed.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	Diesel Engine
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Movable Type

Customization:	Available \|

air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

How are air compressors employed in the mining industry?

Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:

1. Exploration and Drilling:

Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.

2. Ventilation and Air Quality Control:

Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.

3. Material Conveyance:

In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.

4. Dust Suppression:

Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.

5. Instrumentation and Control:

Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.

6. Explosive Applications:

In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.

7. Maintenance and Repair:

Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.

It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.

By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.

air compressor

What is the difference between a piston and rotary screw compressor?

1. Operating Principle:

Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

China factory Ols150 D 15m3/Min 18 Bar Diesel Portable Air Compressor for Sand Blasting/Mining/Jack Hammer Similar CHINAMFG CHINAMFG Rand CHINAMFG Portable Air Compressor with Good quality
editor by CX 2024-01-03

China Standard 15kw Large Power Air Compressor for Garage air compressor for sale

Product Description

Air Compressor
Stock in Africa,UAE,Singapore

Model	HP	KW	Speed (RPM)	Capacity (L/min)	Cylinder (mm)	Max Pressure (Bar)	Tank (L)	Package (LWH mm)	Weight (KG)
LSB3120-400	20	15	800	2000	120*3	8	400	18208401440	483

24 HOURS CONINUOUS RUNNING

The J-compressor can work day and night without pause, because of the round angle modeling air pump and enlarged crankshaft and connecting rod.
20% MORE SUPER DISPLACEMENT

This J-compressor’s s displacement is 20% larger than common compressor, because of the heavy-duty bottom support, larger crank case, 1 processed bearing hole match with CHINAMFG bearing, double valve plate and so on.
HIGH QUALITY SPARE PARTS

Equip with pure copper discharge pipe, release pipe and copper check valve spool, imported material triangle belt, enlarged air filter, Swedish screw steel valve clack, higher precision of piston and piston ring, and so on
HIGH SAFETY VESSEL

Modern and advanced automatic electrical production line promise excellent quality.

Imported LINCOLN welding machine guarantees the smooth welding without undercut

Weekly hydrostatic burst test uses 5 times design pressure to check steel quality and welding safety.
GOOD QUALITY MOTOR

10%-30% more sheet motor staor and rotor. 15% low-voltage start-up is 15% lower than standars voltage of your country. Temperature rises95K to support long time working.

HangZhou CHINAMFG Machinery Co., Ltd., founded in 2008, is an integrated enterprise specilizing in the design, production, sales, and service of auto maintenance equipment. We not only sell products, but also provide project package services, including project layout design, one-stop purchasing, installation and training, have established cooperative relations with many demestic and foreign customers.

We have operations and experience centers in Africa, the Middle East, and Singapore that provide localized services.

Haosail’s products are passed JINGRUI TEST CENTER’s quality management, which can achieve quality traceability and make customers feel at ease.

Our philosophy: Looking CHINAMFG to the establishment of cooperation with customers, including product sales agent, project contract supporting. Haosail, your auto-repair partner from zero to success.

Q: Why to choose Haosail?

1. Compared to the factory which can only provide single product, we can offer you one-stop purchasing, provide whole set of equipment and turnkey solution for your garage.

2. Compared to normal trading company, we have abroad sales stores and professional after-sale team. You don’t need to worry about our company strength, equipment installation and maintenance problems.

3. Compared to normal sales company, we have our LOGO on all of our equipment, Uniform color, if you want to start your own business or act as a product agent, we are the best solution for your investment. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Classification:	Variable Capacity
Job Classification:	Reciprocating
Transmission Power:	Dynamoelectric
Cooling Method:	Air-cooled
Cylinder Arrangement Mode:	Symmetrical Balance
Cylinder Stage:	Single Stage

Customization:	Available \|

air compressor

How are air compressors utilized in the aerospace industry?

Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

1. Aircraft Systems:

Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

2. Ground Support Equipment:

Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

3. Component Testing:

Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

4. Airborne Systems:

In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

5. Environmental Control Systems:

Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

6. Engine Testing:

In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

7. Oxygen Systems:

In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

air compressor

How do you choose the right air compressor for woodworking?

1. Required Air Volume (CFM):

2. Tank Size:

3. Maximum Pressure (PSI):

4. Noise Level:

5. Portability:

6. Power Source:

7. Quality and Reliability:

8. Budget:

air compressor

Are there air compressors specifically designed for high-pressure applications?

4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

China Standard 15kw Large Power Air Compressor for Garage air compressor for sale
editor by CX 2024-01-03